GALJON Pendant Lamp
Assembly Instructions
Safety Information
For indoor use only.
IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Parts Included
- 1x S-hook ?
- Chain links ?
Note: The diagrams also imply the need for tools like pliers ?️ and potentially a drill for mounting. They also show a person consulting IKEA instructions and contacting IKEA.
Assembly Steps
Step 1
Connect the main pole to the lamp body. The diagram shows a threaded connection being secured by twisting.
[Diagram: A person is shown connecting a long pole with wires to the central part of the lamp fixture, which has three sockets for bulbs. A magnified view shows a threaded connection being tightened by rotation.]
Step 2 & 3
Attach the decorative outer rings to the lamp's frame. The diagrams show how to hook and secure these rings onto the vertical supports of the lamp structure.
[Diagram: Two steps showing how to attach curved decorative metal bands to the main frame of the lamp, with arrows indicating the direction of attachment and securing.]
Step 4 & 5
Prepare the ceiling canopy for installation. Attach the canopy to the suspension mechanism and secure the main suspension point.
[Diagram: Step 4 shows a ceiling canopy being positioned over the top of the lamp's suspension rod. Step 5 shows a threaded connector being tightened to secure the suspension loop.]
Step 6
Attach the decorative chain. Use the S-hook ? to connect the chain ? to the lamp's suspension point and then to the main ceiling hook or support.
[Diagram: Shows the decorative chain being attached using an S-hook to the lamp's top suspension point and then to the ceiling mounting hardware. Close-ups show how to connect the chain links and the S-hook.]
Step 7
Mount the lamp body to the ceiling canopy. The diagram shows the lamp body being lifted and connected to the prepared ceiling canopy.
[Diagram: The assembled lamp body, suspended by its chain, is being attached to the ceiling canopy. A magnified view shows a threaded connection being secured.]
Step 8 & 9
Wire the lamp. Strip the ends of the power supply wires and connect them to the appropriate terminals in the ceiling canopy connector block. Ensure correct polarity (Live 'L' and Neutral 'N').
[Diagram: Shows the electrical wires being prepared (stripped) and connected to a terminal block. Labels 'L' and 'N' indicate Live and Neutral connections. One diagram shows a hand using pliers ?️ to cut or strip wires.]
Step 10 & 11
Secure the wiring connections. The diagrams illustrate inserting the wires into the terminal block and tightening them. Polarity (L/N) must be observed.
[Diagram: Detailed views of inserting wires into terminal blocks and securing them. Polarity indicators 'L' and 'N' are shown. One diagram shows a hand connecting a wire to a terminal.]
Step 12
Finalize the mounting of the lamp body to the ceiling canopy. The diagram shows the final connection and securing of the lamp body.
[Diagram: The lamp body is shown being attached and secured to the ceiling canopy, completing the main assembly.]
Information (ⓘ)
Chain Adjustment: The length of the decorative chain can be adjusted. The diagram shows how to adjust the chain links.
Canopy Rotation: The ceiling canopy can be rotated 90 degrees ?, likely for alignment or installation purposes.
Bulb Installation: Install three light bulbs (3x ?). The diagram shows a bulb being screwed into a socket. The type of bulb is illustrated with a filament design.
Correct Installation: Diagrams show the correct way ✔️ to hang the lamp, ensuring it is properly supported and wired. An 'X' symbol ❌ indicates an incorrect method, likely related to improper wiring or support.
[Diagrams: Illustrate adjusting chain length, rotating the canopy, screwing in bulbs, and showing correct vs. incorrect hanging methods.]
