GALJON Pendant Lamp

Important Safety Information

IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.

This warning is repeated in multiple languages: German (WICHTIG!), French (ATTENTION!), Dutch (BELANGRIJK!), Danish (VIGTIGT!), Icelandic (MIKILVÆGT), Norwegian (VIKTIG!), Finnish (TÄRKEÄÄ!), Swedish (VIKTIGT!), Czech (DŮLEŽITÉ), Spanish (IMPORTANTE), Italian (IMPORTANTE!), Hungarian (FONTOS), Polish (WAŻNE), Estonian (OLULINE), Latvian (SVARĪGI), Lithuanian (SVARBU!), Portuguese (IMPORTANTE), Romanian (ATENȚIE!), Slovak (Dôležité), Bulgarian (ВАЖНО!), Croatian (VAŽNO), Greek (ΣΗΜΑΝΤΙΚΟ), Ukrainian (ВАЖЛИВО!), Serbian (VAŽNO!), Slovenian (POMEMBNO), Turkish (ÖNEMLİ!), Chinese (重要事项 / 重要訊息), Korean (중요!), Japanese (重要), Indonesian (PENTING!), Malay (PENTING), Arabic (هام), and Thai (สำคัญ!).

Parts Included

The following parts are included:

• 1x S-hook
• 1x Chain (multiple links)

Assembly Steps

Follow these steps for assembly:

1. Step 1: Attach the threaded rod to the central pole of the lamp fixture. Ensure it is screwed in securely.
2. Step 2: Attach the decorative cage elements to the main frame of the lamp.
3. Step 3: Continue attaching the decorative cage elements.
4. Step 4: Secure the canopy to the top of the lamp assembly.
5. Step 5: Connect the chain to the top of the lamp assembly using the provided hook.
6. Step 6: Adjust the chain length by connecting the S-hook to the desired link. Attach the chain to the ceiling mounting hardware.
7. Step 7: Secure the canopy to the ceiling.
8. Step 8: Connect the electrical wires. The diagram shows a wire connector block. Ensure the correct wires (Line 'L' and Neutral 'N') are connected to the corresponding terminals.
9. Step 9: Insert the wires into the connector block and secure them.
10. Step 10: Connect the wires to the lamp's internal wiring.
11. Step 11: Ensure the Line (L) and Neutral (N) wires are correctly connected to the lamp sockets.
12. Step 12: Insert the light bulbs (3x) into the sockets and screw them in.
13. Step 13: Final check: Ensure the lamp is securely attached and all connections are correct.

Note: The diagram shows a person consulting instructions and then contacting IKEA, suggesting seeking assistance if needed.

Final Check

Ensure the lamp is securely mounted and all electrical connections are properly made. The diagram shows a correct installation and an incorrect one, highlighting the importance of proper wire connection.