BARKASS Pendant Lamp Installation

Safety First

CAUTION:

Before starting, turn off power at the main circuit panel.

FRANÇAIS: ATTENTION: Coupez l'alimentation avant de procéder à l'installation.

ESPAÑOL: ADVERTENCIA: Antes de comenzar el montaje, cortar la luz en el cuadro general.

Diagram shows two figures: one contemplating unassembled parts with a hammer and question mark ❓, the other holding a lamp near an IKEA store [IKEA store logo]. This suggests preparation and seeking guidance.

Parts Included

The package includes one ceiling canopy assembly with a hook ?, electrical cord, and mounting holes.

Installation Steps

Step 1: Attach Rod to Canopy

Attach the threaded rod of the lamp to the ceiling canopy. Screw the rod securely into the canopy assembly.

Diagram shows the lamp's threaded rod being screwed into the ceiling canopy.

Step 2: Wiring Connections

Connect the electrical wires from the ceiling to the lamp's wires using the provided wire connectors [wire connector]. Ensure all connections are secure by twisting the connectors.

Diagram shows electrical wires being connected using wire connectors, with a close-up of the connectors being twisted.

Step 3: Mount Canopy

Mount the ceiling canopy to the ceiling using screws. The lamp is now suspended from the canopy.

Diagram shows the ceiling canopy being screwed into the ceiling, with the lamp hanging from it.

Step 4: Secure Lamp

Secure the lamp's cord or mounting mechanism to the canopy assembly. This may involve a screw or clip.

Diagram shows a screw or clip being used to secure the lamp's mounting to the canopy.

Step 5: Final Attachment

Raise the lamp shade and secure it to the canopy assembly. Ensure it is firmly attached.

Diagram, similar to Step 1, shows the lamp being raised and secured to the canopy.

Step 6: Complete Installation

The installation is complete. The BARKASS pendant lamp is now mounted. A light bulb is to be installed into the fixture.

Diagram shows the fully installed pendant lamp, with a dashed outline of a light bulb below it, indicating where it should be placed.

Product Information

Product: BARKASS Pendant Lamp

Manufacturer: IKEA

Model Number: AA-2376987-1

	RANARP Pendant Lamp Installation Guide Step-by-step instructions for installing the IKEA RANARP pendant lamp, including essential safety precautions and assembly details.
	DEJSA Pendant Lamp Assembly Instructions - IKEA Detailed, step-by-step assembly instructions for the IKEA DEJSA pendant lamp. Includes safety warnings and visual guides for installation. Article Number: AA-2255033-3.
	STORSLINGA Pendant Light Assembly Instructions Detailed assembly instructions for the IKEA STORSLINGA pendant light. This guide provides step-by-step instructions, safety precautions, and information for installing your new lighting fixture.
	SOMMARLÅNKE Pendant Lamp - IKEA Assembly and Safety Instructions Comprehensive assembly and safety instructions for the IKEA SOMMARLÅNKE pendant lamp. Includes important safety warnings, usage guidelines, FCC compliance information, and step-by-step assembly descriptions.
	IKEA HEMMA Cord Set Installation Guide Official installation guide for the IKEA HEMMA cord set, providing step-by-step instructions and safety information for safe and proper assembly of this lighting fixture.
	FELSISK Pendant Lamp Installation Instructions - IKEA Step-by-step guide to installing the IKEA FELSISK pendant lamp. Includes safety precautions, wiring instructions, and assembly steps for model AA-2235210-1.
	AKTERSPRING Pendant Lamp Assembly Instructions \| IKEA T2405 Step-by-step assembly instructions for the IKEA AKTERSPRING pendant lamp (T2405), including essential safety guidelines, parts list, and detailed visual descriptions for installation.
	ASIGE Pendant Lamp Installation Guide - IKEA Concise and accessible installation instructions for the IKEA ASIGE pendant lamp, including safety precautions and step-by-step assembly guidance.