FELSISK Pendant Lamp

Safety First

CAUTION: Before starting, turn off power at the main circuit panel. ⚠️

(Instructions also available in French and Spanish.)

Assembly Steps

1. Mounting the Ceiling Plate

   Attach the mounting bracket to the ceiling plate using the provided screws. Ensure it is securely fastened.

   [Diagram Description: Shows a ceiling plate being attached to a mounting bracket with screws. Arrows indicate the direction of attachment. Four screws (4X) are shown.]

2. Wiring Connections

   Connect the wires from the fixture to the house wiring. Use the provided wire connectors.

   [Diagram Description: Shows electrical wires from the ceiling fixture being connected to house wires using wire connectors. Three connectors (3X) are shown.]

   Wire Identification:

   • Live: Black wire
   • Neutral: White or grey wire (often with a tracer)
   • Earth/Ground: Green or green/yellow wire

3. Attaching the Fixture Body

   Secure the main body of the lamp to the ceiling plate using the provided screws. Ensure it is stable.

   [Diagram Description: Shows the main lamp body being attached to the ceiling plate. Screws are used for fastening. Four screws (4X) are indicated.]

4. Adjusting Suspension Height

   Adjust the length of the suspension cables by rotating the collars. Ensure all cables are set to the desired length.

   [Diagram Description: Shows close-ups of collars on the suspension cables. Arrows indicate rotation and vertical adjustment to change the cable length. Two adjustments (2X) are shown.]

5. Installing Light Bulbs

   Screw the light bulbs into the sockets. Ensure they are properly seated.

   [Diagram Description: Shows a light bulb being screwed into a socket. An arrow indicates the direction of screwing.]

Product Information

Product Name: FELSISK Pendant Lamp

Brand: IKEA

Model Number: AA-2235210-1

Copyright: © Inter IKEA Systems B.V. 2019