FELSISK Pendant Lamp Assembly

Important Safety Information

⚠️ IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice. Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

Assembly Instructions

Tools and Parts Required: Screwdrivers, scissors, tape measure, and a provided hook.

Step 1: Mount the Ceiling Bracket

Attach the mounting bracket to the ceiling using screws. The diagram shows the bracket being secured, with close-ups illustrating how clips engage with the ceiling or a mounting plate.

Step 2: Connect Internal Wiring

Connect the main power supply wires (Live 'L' and Neutral 'N') to the lamp's internal terminal block. Use cables with a cross-section of 2 x 0.75 mm² (H03VV-F or H03VVH2-F). The diagram shows wires being inserted into terminals and secured.

Step 3: Adjust Suspension Cords

Adjust the height of the lamp by manipulating the suspension cords. The diagram shows a mechanism on the cord where rotating it up or down changes the lamp's height.

Step 4: Attach Lamp Housing

Align the main lamp housing with the mounted bracket and attach it. The diagram shows the housing clipping onto the bracket, with a "Click!" sound indicated, suggesting a secure locking mechanism.

Step 5: Secure Wiring and Close Canopy

Neatly arrange and secure the internal wiring using provided clips. Then, close the lamp's canopy over the wiring and terminal block to conceal them. The diagram shows the canopy being closed and latched.

Step 6: Install Light Bulbs

Screw the light bulbs into the sockets until they are securely seated.