METAL AND MARBLE DRINK TABLE
Assembly Instructions
Every item manufactured is designed for exceptional ease of setup, including your new drink table. No additional tools are required for assembly.
Parts List
- A: Top
- One (1) round tabletop.
- B: Pillar
- One (1) long, cylindrical support piece.
- C: Base
- One (1) oval-shaped, weighted base.
Diagrammatic representation: A line drawing of the assembled drink table, showing a circular top, a slender vertical pillar, and a wider, rounded base.
Hardware List
- HW1: Nut screw
- One (1) nut screw.
- HW2: Nut Washer
- One (1) nut washer.
Assembly Instructions
Step 1: Attach Pillar to Base
Place the Nut Washer (HW2) onto the Pillar (B). Insert the Pillar (B) into the top opening of the Base (C). Secure the Pillar (B) to the Base (C) by screwing the Nut Screw (HW1) from underneath the Base (C) and onto the Pillar (B).
Diagrammatic representation: An illustration depicts the assembly of the base and pillar. A nut washer (HW2) is shown on the pillar (B). The pillar (B) is inserted into the base (C). A hand is shown screwing a nut screw (HW1) from the underside of the base (C) into the pillar (B).
Step 2: Attach Top to Pillar
Screw the Top (A) onto the upper end of the Pillar (B). This product may require periodic tightening to maintain stability. Once assembled, place the table in your desired location.
Diagrammatic representation: An illustration shows the circular top (A) being attached to the top of the pillar (B). The pillar (B) is already connected to the base (C).
Users are encouraged to share photos of their assembled table on social media and tag the brand.
