Ecler ARQIS108i Technical Data Sheet

PRODUCT OVERVIEW

The ARQIS108i is a 2-way wooden loudspeaker cabinet featuring a compact format, stylish aesthetics, excellent sound quality, and long-term reliability. It is equipped with a 150 WRMS @ 8Ω, an 8" woofer, and a 1" HF Compression Driver. The included VEASY wall bracket, which is VESA compatible, allows for pan & tilt adjustment using a single screw for fastening. This loudspeaker is specifically designed for permanent installation requirements where a balance between sound performance and architectural/interior design matching is essential.

KEY FEATURES

• Full range, 2-way architectural loudspeaker
• 150 WRMS @ 8Ω
• 8" low frequency woofer
• 1" high frequency compression driver (rotatable)
• Double INPUT/STACK connector, Euroblock type, with security attachment screws to avoid accidental disconnection
• VEASY Wall bracket included, allowing for pan & tilt adjustment with a single screw for fastening. It is robust, quick, and easy to install, with jumps and markings for repeating speaker orientation.
• Metal safety sling included, to avoid drops in case of accidental detachment from the wall surface
• U-bracket wall-mount accessory compatible (not included)
• Available in black (RAL 9005) and white (RAL 9003) colours.
• Ecler Loudspeakers EQ Settings available.
• EASE files available

APPLICATIONS

• Commercial
• Corporate
• Hotels and restaurants
• Education
• Sports and wellness
• Leisure

ACCESSORIES

• ARQ108UB

TECHNICAL SPECIFICATIONS

System

Transducers

Filters

Physical

¹10dB below the sound pressure level at specified sensitivity

²6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.

³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.

⁴Calculated from sensitivity and power handling specifications, exclusive of power compression

FREQUENCY RESPONSE ON-AXIS

A graph displays the Sound Pressure Level (SPL) in dB@1W/1m on the y-axis against Frequency in Hz on the x-axis. The curve shows a relatively flat response from approximately 100 Hz to 20 kHz, with a dip around 63 Hz and a gradual rise towards the higher frequencies.

MECHANICAL DIAGRAMS

The mechanical diagrams provide detailed dimensions and views of the ARQIS108i loudspeaker. The diagrams show:

• A front view with dimensions indicating a width of 244 mm and a height of 390 mm.
• A side view showing a depth of 280 mm.
• A rear view detailing connection points and mounting options, including flying points (6 x M6 & 2 x M8).
• A diagram illustrating the included VEASY wall bracket.

POLAR DIAGRAMS

HORIZONTAL

The horizontal polar diagram shows the directivity of the loudspeaker at different frequencies. The diagrams plot Sound Pressure Level (dB SPL) against the angle in degrees (0° to 180° on each side). The data indicates a wide coverage angle, particularly at lower frequencies, narrowing slightly at higher frequencies.

VERTICAL

The vertical polar diagram illustrates the loudspeaker's directivity in the vertical plane. Similar to the horizontal diagram, it plots SPL against angle. The data shows consistent coverage across various frequencies, with slight variations in directivity.

A&E SPECIFICATIONS

The loudspeaker is a 2-way wooden cabinet featuring a high-efficiency 8" mid/low woofer and a 1" rotatable compression driver. It offers a power handling of 150 W RMS with a peak power handling of 600 W, and an effective frequency range (±10 dB) from 65 Hz to 20 kHz. The crossover filter is set at 3.5 kHz. Sensitivity is rated at 90 dB (1W/1m), with a maximum continuous sound pressure level of 112 dB. The coverage angle is 130° x 130° (HxV).

The loudspeaker has a nominal impedance of 8 Ω. The enclosure is constructed from medium density wood with a textured and scratch-resistant paintwork finish. The front features an overlapping grille with a rotatable logo for a slim and elegant appearance. It includes a Speakon© and Euroblock connector, with security attachment screws to prevent accidental disconnection.

A VESA compatible wall bracket is included, enabling pan & tilt adjustment with a single screw for fastening. An additional metal safety sling is provided to prevent drops due to accidental detachment. The full-range system's enclosure measures 244 mm wide, 390 mm high, and 280 mm deep, with a weight not exceeding 8.4 Kg. The loudspeaker model is the ECLER ARQIS108i.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

For technical queries, contact your supplier, distributor, or complete the contact form on the Ecler website under Support / Technical requests.

NEEC AUDIO BARCELONA S.L.
Motors, 166-168
08038 Barcelona - Spain
(+34) 932238403
information@ecler.com
www.ecler.com