Ecler ARQIS110i Cabinet Loudspeakers

Product Overview

The Ecler ARQIS110i is a 2-way wooden loudspeaker cabinet featuring a compact format, stylish aesthetics, excellent sound quality, and long-term reliability. It delivers 300 WRMS @ 8Ω, with a 10" woofer and a 1.7" HF Compression Driver. It includes a 35 mm mount socket and 12 x M8 rigging points, allowing for horizontal or vertical mounting options. This loudspeaker is specifically designed for permanent installation requirements where a perfect balance between sound performance and architectural/interior design matching is essential.

Key Features

• Full range, 2-way architectural loudspeaker
• 300 WRMS @ 8Ω
• 10" low frequency woofer
• 1.7" high frequency compression driver (rotatable)
• Double INPUT/STACK connector: Euroblock + Speakon® type, with security attachment screws to avoid accidental disconnection
• 35 mm mount socket, compatible with SR12 wall bracket (not included) & TRIPO1 floor stand (not included)
• U-bracket wall-mount accessory compatible (not included)
• 12 x M8 cabinet flying points
• Available in black (RAL 9005) and white (RAL 9003) colours
• Ecler Loudspeakers EQ Settings available
• EASE files available

Applications

• Commercial
• Corporate
• Hotels and restaurants
• Education
• Sports and wellness
• Leisure

Accessories

• ARQ110UB
• SR12
• TRIPO1

Technical Specifications

System

Transducers

Filters

Physical

¹10dB below the sound pressure level at specified sensitivity.

²6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.

³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.

⁴Calculated from sensitivity and power handling specifications, exclusive of power compression.

Frequency Response On-Axis

A graph displays the frequency response of the ARQIS110i loudspeaker. The Y-axis represents SPL (dB@1W/1m) ranging from 60 to 120 dB, and the X-axis represents Frequency (Hz) from 20 to 20K.

Mechanical Diagrams

Detailed mechanical diagrams illustrate the dimensions and mounting points of the Ecler ARQIS110i loudspeaker. All measurements are in mm. The diagrams show front, side, and rear views, including dimensions for width, height, depth, and flying points.

Polar Diagrams

Polar diagrams illustrate the directivity of the ARQIS110i loudspeaker in both horizontal and vertical planes. Each diagram shows SPL in dBSSL on the radial axis and the angle in degrees on the circular axis. Multiple curves represent different frequencies (125Hz to 8kHz) with corresponding bandwidth (BW) and directivity index (DI) values provided in tables.

A&E Specifications

The loudspeaker is a 2-way wooden cabinet with a high-efficiency 10" mid/low woofer and a 1.7” rotatable compression driver. It has a power handling of 300 W RMS and a peak power handling of 1200 W. The effective frequency range (±10 dB) is from 70 Hz to 19 kHz. The crossover filter is at 2.1 kHz. Sensitivity is 94 dB (1W/1m), and maximum continuous sound pressure level is 119 dB. The coverage angle is 110° x 110°. The nominal impedance is 8 Ω. The enclosure is constructed from medium density wood with a textured and scratch-resistant paintwork finish. The front features an overlapping grill with a rotatable logo. It includes a Speakon® and Euroblock connector with security attachment screws. The dimensions are 359.6 mm wide, 495 mm high, and 362.2 mm deep, with a weight not exceeding 18.5 kg. The loudspeaker model is the Ecler ARQIS110i.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

For technical queries, contact your supplier, distributor, or complete the contact form on the Ecler website under Support / Technical requests. Contact information: NEEC AUDIO BARCELONA S.L., Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com