Ecler ARQISSB15i Cabinet Loudspeakers
Architectural Loudspeaker Cabinet
Product Overview
The Ecler ARQISSB15i is a wooden subwoofer reinforcement cabinet featuring a compact design, stylish aesthetics, excellent sound quality, and long-term reliability. It is equipped with a 600 WRMS @ 8Ω rating and a 15" LF driver. This loudspeaker is specifically engineered for permanent installation requirements where a balance between sound performance and architectural/interior design matching is essential. It includes a 35 mm top-hat pole mount socket and 12 x M8 rigging points.
Key Features
- Subwoofer, 1-way architectural loudspeaker
- 600 WRMS @ 8Ω
- 1 x 15" low frequency woofer
- Double INPUT/STACK connector, Speakon type
- 35 mm top-hat mount socket, for pole mount combinations with ARQIS110i, ARQIS112i, etc.
- 12 x M8 cabinet flying points.
- Available in black (RAL 9005) colour
- EASE files available
Applications
- Commercial
- Corporate
- Hotels and restaurants
- Education
- Sports and wellness
- Leisure
Technical Specifications
| System | |
|---|---|
| Effective frequency range¹ | 31Hz-3kHz |
| Power handling | 600W RMS / 2400W peak |
| Sensitivity³ | 97dB (1W/1m) |
| Maximum SPL⁴ | 125dB RMS / 131dB peak |
| Recommended amplifier | 1200W |
| Ways | 1 way |
| Driver | 15" woofer |
| Nominal impedance | 8Ω |
| Crossover filter | No |
| Recommended High-Pass protection filter | 40 Hz with minimum 12 dB / octave filter |
| Physical | |
|---|---|
| Connection type | 2x Speakon (+1, -1) |
| Installation options | Surface, wall, desktop |
| Environmental | IP31 |
| Enclosure material | Plywooden |
| Grille material | Steel |
| Grille fixing system | Screw fixation |
| Flying points | 12 x M8 |
| Operating temperature | Min: -20°C ; -4°F, Max: 70°C; 158°F |
| Operating humidity | <85% HR |
| Storage temperature | Min: -20°C; -4°F, Max: 70°C; 158°F |
| Storage humidity | <90% HR |
| Included accessories | 4x Rubber feet / 4x Screws |
| Finished color | Black (RAL9005) |
| Dimensions (WxHxD) | 534 x 460 x 525 mm / 21.02 x 18.11 x 20.67 in |
| Weight | 32 kg / 70,54 lb |
| Pieces per box | 1 unit |
| Shipping dimensions (WxHxD) | 624 x 555 x 610 mm / 24.57 x 21.85 x 24.02 in |
| Shipping weight | 36.2 kg / 79.8 lb |
¹10dB below the sound pressure level at specified sensitivity
³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 1 kHz.
⁴Calculated from sensitivity and power handling specifications, exclusive of power compression
Frequency Response On-Axis
A graph displays the Sound Pressure Level (SPL) in dB on the y-axis against Frequency in Hz on the x-axis. The curve shows a peak around 60Hz, then gradually decreases, with notable dips and peaks across the spectrum, generally falling within the 31Hz to 3kHz range as specified.
Mechanical Diagrams
Diagrams illustrating the dimensions and mounting points of the Ecler ARQISSB15i. The diagrams show the cabinet from different angles, detailing measurements in millimeters for width, height, and depth, as well as the placement of connectors, flying points, and the pole mount socket.
A&E Specifications
The loudspeaker is a 1-way wooden subwoofer cabinet featuring a high-efficiency 15” low woofer. It has an RMS power handling of 600 W and a peak power handling of 2400 W, with an effective frequency range of ±10 dB from 31Hz to 3kHz. The sensitivity is 97 dB (1W/1m), and the maximum continuous sound pressure level is 125 dB. The nominal impedance is 8 Ω. The enclosure is constructed from medium density plywood with a textured, scratch-resistant paintwork finish. The front features an overlapping grille with a rotatable logo for a slim and elegant appearance. It includes 2 Speakon© connectors, a 35 mm top-hat pole mount socket, and 12 x M8 rigging points. The enclosure dimensions are 534 mm (width) x 525 mm (height) x 460 mm (depth), with a maximum weight of 32 Kg. The loudspeaker model is the ECLER ARQISSB15i.
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries, contact your supplier, distributor, or complete the contact form on the NEEC AUDIO BARCELONA S.L. website under Support / Technical requests.
Contact information: Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
