Ecler ARQIS108i
Architectural Loudspeaker Cabinet
Product Overview
The Ecler ARQIS108i is a 2-way wooden loudspeaker cabinet designed for permanent installation. It offers a compact format, stylish aesthetics, excellent sound quality, and long-term reliability. It features a 150 WRMS @ 8Ω rating, an 8" woofer, and a 1" HF Compression Driver. The included VEASY wall bracket is VESA compatible and allows for pan and tilt adjustment with a single screw for fastening. This loudspeaker is engineered to provide a perfect balance between sound performance and architectural/interior design integration.
Key Features
- Full range, 2-way architectural loudspeaker
- 150 WRMS @ 8Ω power handling
- 8" low frequency woofer
- 1" high frequency compression driver (rotatable)
- Double INPUT/STACK connector (Euroblock type) with security attachment screws to prevent accidental disconnection
- VEASY Wall bracket included, offering pan & tilt adjustment with a single screw for fastening. It is robust, quick, and easy to install, featuring jumps and markings for repeating speaker orientation.
- Metal safety sling included to prevent drops in case of accidental detachment from the wall surface
- U-bracket wall-mount accessory compatible (not included)
- Available in black (RAL 9005) and white (RAL 9003)
- Ecler Loudspeakers EQ Settings available
- EASE files available
Applications
- Commercial spaces
- Corporate environments
- Hotels and restaurants
- Educational institutions
- Sports and wellness facilities
- Leisure venues
Accessories
- ARQ108UB
Technical Specifications
System
| Parameter | Value |
|---|---|
| Effective frequency range¹ | 65 Hz - 20 kHz (-10dB) |
| Coverage angle² | 130°x130° (HxV) |
| Power handling | 150W RMS / 600W Peak |
| Sensitivity³ | 90dB (1W/1m) |
| Maximum SPL⁴ | 112dB continuous / 118dB peak |
| Recommended amplifier | 300W |
Transducers
| Parameter | Value |
|---|---|
| Ways | 2-way, full range |
| Low frequency driver | 8" woofer |
| High frequency driver | 1" Compression driver (rotatable) |
| Nominal impedance | 8Ω |
Filters
| Parameter | Value |
|---|---|
| Crossover filter | 3.5 kHz |
| Recommended High-Pass protection filter | 70 Hz with minimum 12 dB / octave filter |
Physical
| Parameter | Value |
|---|---|
| Connection type | 1 x Euroblock & 1x Speakon® (+1, -1) |
| Installation options | Surface, wall, desktop |
| Environmental | IP31 |
| Enclosure material | MDF |
| Grille material | Steel |
| Grille fixing system | Screw fixation |
| Flying points | 6 x M6 & 2 x M8 |
| Operating temperature | Min: -20°C; -4°F, Max: 70°C; 158°F |
| Operating humidity | <85% HR |
| Storage temperature | Min: -20°C; -4°F, Max: 70°C; 158°F |
| Storage humidity | <90% HR |
| Included accessories | VEASY Wall Bracket / 3mm Allen key / 4mm Allen key / 6mm Allen key |
| Finished color | Black (RAL9005) or White (RAL 9003) |
| Dimensions (WxHxD) | 244 x 390 x 280 mm / 9.61 x 15.35 x 11.02 in |
| Weight | 8.4 kg / 18.51 lb |
| Pieces per box | 1 unit |
| Shipping dimensions (WxHxD) | 435 x 445 x 320 mm / 17.13 x 17.52 x 12.60 in |
| Shipping weight | 10.5 kg / 23.14 lb |
1 10dB below the sound pressure level at specified sensitivity.
2 6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz.
3 Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
4 Calculated from sensitivity and power handling specifications, exclusive of power compression.
Diagrams and Performance Data
Frequency Response On-Axis
This graph displays the loudspeaker's Sound Pressure Level (SPL) in decibels (dB) on the y-axis against Frequency in Hertz (Hz) on the x-axis. The curve shows the frequency response from 20 Hz to 20 kHz. It indicates a sensitivity of approximately 90 dB at 1W/1m, with the response starting around 65 Hz, rising to a peak, and maintaining a relatively consistent output across the audible spectrum, with some minor variations.
Mechanical Diagrams
The mechanical diagrams illustrate the physical dimensions and construction of the ARQIS108i loudspeaker. They show front, side, and rear views. Key dimensions provided are: Width 244 mm, Height 390 mm, Depth 280 mm. The diagrams also indicate mounting points (flying points) and connector locations.
Polar Diagrams
These diagrams illustrate the loudspeaker's directivity, showing how sound is dispersed horizontally and vertically at different frequencies. The horizontal polar diagram shows dispersion patterns from 0° to 180° (and -180°), with concentric circles representing sound pressure levels (dBSPL) and radial lines indicating degrees. The vertical polar diagram presents similar information for vertical dispersion. Tables accompanying the diagrams list specific frequencies (e.g., 125 Hz, 1 kHz, 8 kHz), their corresponding beamwidth (BW), directivity index (DI), and Q values, which quantify the directivity of the sound.
A&E Specifications
The loudspeaker is a 2-way wooden cabinet featuring a high-efficiency 8" mid/low woofer and a 1" rotatable compression driver. It offers a power handling of 150 W RMS with a peak power handling of 600 W and an effective frequency range of 65 Hz to 20 kHz (±10 dB). The crossover filter is set at 3.5 kHz. Sensitivity is rated at 90 dB (1W/1m), with a maximum continuous sound pressure level of 112 dB. The coverage angle is 130° x 130° (HxV), and the nominal impedance is 8 Ω. The enclosure is constructed from medium density wood with a textured and scratch-resistant paint finish. The front features an overlapping grille with a rotatable logo. It includes Speakon® and Euroblock connectors with security attachment screws. A VESA compatible wall bracket for pan & tilt adjustment is provided, secured by a single screw. An additional metal safety sling is included for drop prevention. The enclosure dimensions are 244 mm (W) x 390 mm (H) x 280 mm (D), and the weight does not exceed 8.4 Kg. The specific model is the ECLER ARQIS108i.
Contact and Disclaimer
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries, please contact your supplier, distributor, or complete the contact form on the Ecler website under Support / Technical requests.
NEEC AUDIO BARCELONA S.L.
Motors, 166-168
08038 Barcelona - Spain
Phone: (+34) 932238403
Email: information@ecler.com
Website: www.ecler.com
