Ecler ARQIS208i Cabinet Loudspeakers
Architectural Loudspeaker Cabinet
Product Overview
The ARQIS208i is a 2-way wooden loudspeaker cabinet featuring a compact format, stylish aesthetics, excellent sound quality, and long-term reliability. It is equipped with a 300 WRMS @ 8Ω power handling, two 8" woofers, and a 1" HF Compression Driver. A "U" shape wall bracket, included with the product, allows for tilt adjustment. This loudspeaker is specifically designed for permanent installation requirements where a balance between sound performance and architectural/interior design is essential.
Key Features
- Full range, 2-way architectural loudspeaker
- 300 WRMS @ 8 Ω
- 2 x 8" low frequency woofer
- 1" high frequency compression driver (rotatable)
- Double INPUT/STACK connector: Euroblock + Speakon® type, with security attachment screws to prevent accidental disconnection
- "U" Shape wall bracket included for tilt adjustment
- 4x M6 & 12 x M8 cabinet flying points
- Metal safety sling included to prevent drops in case of accidental detachment from the wall surface
- Available in black (RAL 9005) and white (RAL 9003)
- Ecler Loudspeakers EQ Settings available
- EASE files available
Applications
- Commercial
- Corporate
- Hotels and restaurants
- Education
- Sports and wellness
- Leisure
Technical Specifications
System
| Specification | Value |
|---|---|
| Effective frequency range¹ | 73Hz-20kHz |
| Coverage angle² | 130° x 30° (HxV) |
| Power handling | 300W RMS / 1200W peak |
| Sensitivity³ | 94dB (1W/1m) |
| Maximum SPL⁴ | 119dB RMS / 125dB peak |
| Recommended amplifier | 600W |
Transducers
| Specification | Value |
|---|---|
| Ways | 2-way, full range |
| Low frequency driver | 2 x 8" woofer |
| High frequency driver | 1" Compression driver (rotatable) |
| Nominal impedance | 8Ω |
Filters
| Specification | Value |
|---|---|
| Crossover filter | 2,6 kHz |
| Recommended High-Pass protection filter | 70 Hz with minimum 12 dB / octave filter |
Physical
| Specification | Value |
|---|---|
| Connection type | 1 x Euroblock & 1x Speakon© (+1, -1) |
| Installation options | Surface, wall, desktop |
| Environmental | IP31 |
| Enclosure material | MDF |
| Grille material | Steel |
| Grille fixing system | Screw fixation |
| Flying points | 4x M6 & 12 x M8 |
| Operating temperature | Min: -20°C; Max: 70°C |
| Operating humidity | <90% HR |
| Storage temperature | Min: -20°C; Max: 70°C |
| Storage humidity | <90% HR |
| Included accessories | U Bracket / 5mm Allen key / 6mm Allen key |
| Finished color | Black (RAL9005) or White (RAL 9003) |
| Dimensions (WxHxD) | 610 x 244 x 280 mm |
| Weight | 14,8 kg / 32,62 lb |
| Pieces per box | 1 unit |
| Shipping dimensions (WxHxD) | 670 x 325 x 370 mm |
| Shipping weight | 16.4 kg / 36.15 lb |
¹ 10dB below the sound pressure level at specified sensitivity.
² 6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.
³ Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
⁴ Calculated from sensitivity and power handling specifications, exclusive of power compression.
Frequency Response On-Axis
A graph showing the frequency response of the ARQIS208i loudspeaker. The Y-axis represents SPL (dB@1W/1m) ranging from 60 to 115 dB, and the X-axis represents Frequency (Hz) from 20 Hz to 20 kHz. The plotted line shows a relatively flat response between approximately 100 Hz and 16 kHz, with a gradual roll-off at lower frequencies and a slight peak around 4-8 kHz.
Mechanical Diagrams
Diagrams illustrating the physical dimensions and mounting points of the Ecler ARQIS208i loudspeaker. The diagrams show the front, side, and rear views of the cabinet, with key dimensions indicated in millimeters. The front view shows the grille and logo placement. The side view details the cabinet depth and height. The rear view displays the connection panel, flying points (M6 and M8), and mounting bracket interface.
Polar Diagrams
Horizontal
A set of polar diagrams illustrating the horizontal directivity of the ARQIS208i loudspeaker at various frequencies. The diagrams show sound pressure level (dB SPL) plotted against angle (degrees). Each frequency band (e.g., 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz) is represented by a different colored curve. The data indicates a wide dispersion pattern at lower frequencies, narrowing at higher frequencies.
Vertical
A set of polar diagrams illustrating the vertical directivity of the ARQIS208i loudspeaker at various frequencies. Similar to the horizontal diagrams, these show sound pressure level (dB SPL) plotted against angle (degrees) for different frequency bands. The vertical dispersion pattern is also shown to narrow with increasing frequency.
A&E Specifications
The loudspeaker is a 2-way wooden cabinet featuring high-efficiency 2x8" mid/low woofers and a 1" rotatable compression driver. It has a power handling of 300 W RMS and a peak power handling of 1200 W, with an effective frequency range of 73 Hz to 20 kHz (±10 dB). The crossover filter is set at 2.6 kHz, and the sensitivity is 94 dB (1W/1m), with a maximum continuous sound pressure level of 111 dB. The coverage angle is 130° x 30° (HxV). The loudspeaker has a nominal impedance of 8 Ω and is constructed from medium density wood with a textured, scratch-resistant paint finish. The front features an overlapping grille with a rotatable logo. It includes a Speakon® and Euroblock connector with security screws. A U wall bracket for tilt adjustment and a metal safety sling are provided. The cabinet dimensions are 610 mm wide, 244 mm high, and 280 mm deep, with a weight not exceeding 14.8 kg. The loudspeaker model is the ECLER ARQIS208i.
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in design or manufacturing that may affect these product specifications.
For technical queries, contact your supplier, distributor, or complete the contact form on the Ecler website under Support / Technical requests.
NEEC AUDIO BARCELONA S.L., Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
