JLab JBuds Work Wireless Headset

Warranty and Support

Your Warranty: All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us: Reach out to us at support@jlab.com or visit jlab.com/contact.

Register Today: Visit jlab.com/register for product updates, how-to tips, and FAQs.

Bluetooth Pairing

1. Turn on Bluetooth in your device settings.
2. Press and hold the button on the headset for 8 seconds. The lights will flash blue/red.
3. Select "JLab JBuds Work" in your device settings to connect.

Diagram showing phone Bluetooth settings, headset with flashing lights, and connection confirmation.

Multipoint (Connect 2 Devices Simultaneously)

1. Once the FIRST device is connected, turn off Bluetooth in its device settings. The JBuds Work will auto-enter Bluetooth Pairing.
2. Enter your SECOND device's Bluetooth settings and connect to JBuds Work.
3. Enter your FIRST device's settings. Turn on Bluetooth and reconnect to JBuds Work.

Diagrams illustrating the multipoint connection process across two devices.

For more info and troubleshooting on MULTIPOINT visit: JLAB.COM/MULTIPOINT

Button Functions

• Volume Up: Press once
• Track Forward: Press and hold 2+ seconds
• Volume Down: Press once
• Track Backward: Press and hold 2+ seconds
• Power On/Off: Press and hold 3+ seconds
• Play/Pause: Press once
• Answer/Hang Up: Press once (works when boom mic is in down position)
• Reject Incoming Call: Press and hold 1+ second
• Activate Siri (iOS) or “OK Google” (Android): Press twice
• Hear Yourself On/Off: Triple press
• Bluetooth Pairing: See Bluetooth Pairing section.

Diagram of headset buttons and their functions.

Switch EQ Voice / Music: Press and hold both buttons simultaneously.

Boom Microphone

• Auto Answer Call: Rotate down
• Auto Hang Up / Reject Incoming Call: Rotate up

Microphone Mute On/Off:

Visual indicators for Mute Off (white circle) and Mute On (red circle).

Diagrams showing Mono Mode and Stereo Mode headset configurations.

Charging

Connect to a computer or USB 5V 1A (or less) output device.

Note: JBuds Work can simultaneously charge while Bluetooth is connected.

Diagram illustrating charging via USB connection.

Aux Input

JBuds Work can be used as a wired headset with an AUX cable.

Note: The headset will still use a limited amount of battery for the microphones to function.

Diagram showing AUX cable connection.

Cautions

• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in a safe location when not in use.

Shop and Resources

Shop products | Product alerts | Burn-in your headphones

JLab Store + Burn-in Tool

Download on the App Store

GET IT ON Google play