JLab JBuds Work Headphones
We love that you move with JLab! We are proud of our products and stand behind them completely.
YOUR WARRANTY: All warranty claims are subject to JLab authorization and our sole discretion. Keep your purchase receipt to ensure warranty coverage. [Two Year Warranty Seal] [TEAMJLAB Logo]
CONTACT US: You can contact us at support@jlab.com or visit intl.jlab.com/contact
REGISTER NOW: intl.jlab.com/register - For product updates, tips, and FAQs.
Bluetooth Pairing
-
Activate Bluetooth in your device's settings. [Phone screen showing Bluetooth settings active]
-
Hold the button for 8 seconds. Release the button. The lights will flash blue/red. [Headphones with button pressed, indicator lights flashing]
-
Select 'JLab JBuds Work' in your device's settings to connect. [Phone screen showing 'JLab JBuds Work' selected in Bluetooth device list]
Multipoint (Connect 2 Devices Simultaneously)
-
Once the FIRST device is connected, turn off Bluetooth in the device's settings. JBuds Work will automatically enter Bluetooth pairing mode. [Phone screen showing Bluetooth turned off]
-
Go to the Bluetooth settings of the SECOND device and connect to JBuds Work. [Headphones connected to a second device]
-
Go to the settings of the FIRST device. Turn on Bluetooth and reconnect to JBuds Work. [Phone screen showing Bluetooth turned on and reconnecting]
For more information or to troubleshoot MULTIPONT connection issues, visit: intl.jlab.com/multipoint
Button Functions
- Volume Up: Press once [⬆️]
- Next Track: Hold for more than 2 seconds [⏩]
- Volume Down: Press once [⬇️]
- Previous Track: Hold for more than 2 seconds [⏪]
- Power On/Off: Hold for more than 3 seconds [?]
- Play/Pause: Press once [▶️/⏸️]
- Answer/Hang Up: Press once (works when the microphone boom is down) [?]
- Reject Incoming Call: Hold for more than 1 second [??]
- Activate Siri (iOS) or 'OK Google' (Android): Press twice [?️]
- Activate or Deactivate Auto-Hear: Press three times (during a call) [?]
- Bluetooth Pairing: See the 'Bluetooth Pairing' section.
Change Voice / Music Equalizer: Press and hold both buttons simultaneously [?️]
Boom Microphone
The boom microphone allows you to answer calls automatically by lowering it and hang up/reject calls by raising it. [Diagram showing boom microphone operation for call management]
Activate or Deactivate Microphone Mute: [Mute Icon] (Indicates mute status)
Mode: [Headphones icon] Mono Mode, [Headphones icon] Stereo Mode
Device Charging
Connect it to a computer or a USB 5v 1A (or less) output device. [Diagram showing headphones connected via USB cable to a power source]
Note: JBuds Work can charge while connected to Bluetooth. Turn on and connect to the device once charging is complete.
Auxiliary Input
JBuds Work can be used as wired headphones using an auxiliary (AUX) cable. [Diagram showing headphones connected via AUX cable to an audio device]
Note: The headphones will continue to use a limited amount of battery for the microphone to function.
Precautions
- Avoid moisture or liquids reaching the earcups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or impacting the headphones, overloading the cable by pulling it quickly or applying excessive force, and avoid bending the cable on a sharp edge.
- Earwax may accumulate on the eartips, reducing sound quality. Carefully remove earwax with a cotton swab or other small object to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or stop using them for a while.
- If you experience regular discomfort while using this product, discontinue use and consult a doctor.
- We recommend treating your headphones like you would a nice pair of sunglasses, and storing them in a safe place when not in use.
