JLab JBuds Work Headphones
We are thrilled you are using JLab! We are proud of our products and fully identify with them.
Warranty and Support
Your Warranty ?️: All warranty claims are subject to JLab approval and our sole discretion. To claim your warranty, please keep your proof of purchase.
Contact Us ?: You can contact us via support@jlab.com or visit intl.jlab.com/contact.
Register Today ✍️: Visit intl.jlab.com/register for Product Updates | Tips & Tricks | FAQs and more.
Bluetooth Pairing ?
-
Step 1
On your device's settings, turn on Bluetooth.
[Illustration: Phone settings screen showing Bluetooth toggle ON.]
-
Step 2
Press and hold the button for 8 seconds. Release. The indicator lights will blink blue/red.
[Illustration: Headphones with button being pressed, indicator lights blinking blue/red.]
-
Step 3
In your device's settings, select 'JLab JBuds Work' to connect.
[Illustration: Phone settings screen showing 'JLab JBuds Work' as a connected device.]
Multipoint (Connect 2 Devices Simultaneously)
-
Step 1
Once the FIRST device is connected, turn off Bluetooth in the settings. JBuds Work will automatically enter Bluetooth pairing mode.
[Illustration: Phone settings screen showing Bluetooth turned OFF.]
-
Step 2
Go to the SECOND device's Bluetooth settings and connect to JBuds Work.
[Illustration: Second phone screen connecting to 'JLab JBuds Work'.]
-
Step 3
Go to your FIRST device's settings. Turn on Bluetooth and reconnect to JBuds Work.
[Illustration: First phone screen showing Bluetooth turned ON and reconnecting to 'JLab JBuds Work'.]
For more information and troubleshooting on MULTIPOINT, visit: INTL.JLAB.COM/MULTIPOINT
Button Functions
- Volume Up ➕: Single press
- Track Forward ⏩: Press and hold for 2+ seconds
- Volume Down ➖: Single press
- Track Back ⏪: Press and hold for 2+ seconds
- Power On/Off ?: Press and hold for 3+ seconds
- Play/Pause ▶️/⏸️: Single press
- Answer Call / Hang Up ?: Single press (works when Boom microphone is in the down position)
- Reject Incoming Call ?❌: Press and hold for 1+ second
- Activate Siri (iOS) or “OK Google” (ANDROID) ?: Double press
- Turn On/Off Hear Yourself ?: Triple press (when on a call)
- Bluetooth Pairing ?: See Bluetooth Pairing section.
Switch EQ Voice / Music ?️: Press and hold both buttons simultaneously
Microphone Boom ?
- Automatically Answer Calls: Rotate down
- Automatically Hang Up / Reject Incoming Calls: Rotate up
- Mute / Unmute Microphone: Press the button on the boom.
[Illustration: Headphones showing microphone boom rotation and mute button.]
[Illustration: Mono Mode vs. Stereo Mode.]
Charging ?
Connect to a computer or a USB 5V 1A (or less) output on your device.
Note: JBuds Work can charge simultaneously while connected via Bluetooth. Turn on and connect them to your device after they begin charging.
[Illustration: Headphones connected via USB cable to a computer or power adapter. Shows 'CHARGING' and alternative power source options.]
AUX Input ?
JBuds Work can be used as wired headphones with AUX.
Note: The headphones will use a limited amount of battery for the microphone function.
[Illustration: Headphones connected via AUX cable to a device.]
Safety Warnings ⚠️
- Ensure moisture or liquids do not get into the earcups.
- Do not expose headphones to extreme heat, cold, or humidity.
- Be careful not to drop or put pressure on the headphones. Do not pull the cable forcefully or bend it at sharp angles.
- Earwax may accumulate in the earcups, which can reduce sound quality. To restore sound quality, carefully remove wax with a cotton swab or other small tool.
- If you experience discomfort or pain, try lowering the volume or stop using the headphones for a while.
- If you regularly experience discomfort while using this product, discontinue use and consult your doctor.
- We recommend treating your headphones like quality sunglasses and storing them in a safe place when not in use.
Get the App
Shop Products | Product Alerts | Burn-in Headphones
JLab Store + Burn-in Tool
