JLab Audio Rewind Wireless Headphones
We are pleased that you are using JLab Audio headphones! We are proud of our products and fully confident in their quality.
Warranty and Support
Your Warranty
All warranty claims require JLab Audio approval, and their fulfillment is our sole responsibility. To ensure warranty validity, keep your proof of purchase document.
Contact Us
Write to us at support@jlabaudio.com or visit our website intl.jlabaudio.com/contact.
Register Today
Product updates | Tutorial tips | FAQs and more
First-Time Setup: Bluetooth Pairing
- Turn on Bluetooth in your device's settings.
- Press and hold the button for 10 seconds. Release.
The pairing mode is indicated by a red and blue flashing light near the foam earcup.
To connect, select 'JLab Rewind' from your device's settings. The blue light flashes slowly during Bluetooth pairing.
Diagram Description: Visual guide showing the steps for Bluetooth pairing. Step 1: A smartphone screen displaying Bluetooth settings. Step 2: An illustration of the headphones with a button being pressed. Step 3: Headphones with a red and blue flashing light near the earcup.
Pairing New / Additional Devices
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on the new device. Repeat the FIRST-TIME SETUP process for new devices.
Notes
- Bluetooth is a wireless radio technology, meaning it is sensitive to objects between the headphones and the connected device. The headphones are designed for use within a 33-foot (10-meter) range of the connected device, provided there are no major objects (like walls) between them.
- After successful connection, the headphones will remember your device and automatically pair when turned on. Only one device can be connected at a time. To pair a second device, you must first disconnect the current device via its Bluetooth settings.
- If the Bluetooth connection is interrupted for any reason, reconnect your Bluetooth device manually.
Charging
NOTE! The headphones do not turn on while charging. Allow approximately 3 hours for a full charge.
Connect the Rewind headphones using the included charging cable to a computer or a USB 5V power outlet.
Diagram Description: Illustration of the JLab Audio Rewind headphones connected via a USB cable to a power source. A red indicator light on the headphones signifies charging, while a blue light indicates a full charge.
The red light indicates charging, and the blue light indicates a full battery.
Button Functions
Bluetooth Pairing:
(Follow first-time setup instructions)
Power On:
Press and hold for 2 seconds.
Power Off:
Press and hold for 4 seconds. (Slowly flashing blue light indicates power on).
Play / Pause / Answer Call / End Call:
1 press.
Activate Siri (iOS) or "OK Google" (Android):
2 presses.
Next Track:
Press and hold for 2 seconds.
Equalizer Modes
Toggle EQ Mode:
3 presses (activates Rewind's 3 EQ settings sequentially).
JLab SIGNATURE (One Beep):
JLab C3T™ signature sound, with enhanced vocals and bass.
BALANCED (Two Beeps):
Even sound profile without additional processing.
BASS BOOST (Three Beeps):
Enhanced bass and sub-bass.
Precautions
- Avoid moisture or liquids from entering the headphone earcups.
- Avoid excessive heat, cold, and humidity.
- Avoid dropping or crushing the headphones, and do not strain the cord with sudden tugs or excessive force, and do not bend the cord at too sharp an angle.
- Earwax may accumulate in the headphone earcups, which can degrade sound quality. To improve sound quality, carefully remove earwax with a cotton swab or other small tool.
- If you experience discomfort or pain, reduce the volume or temporarily discontinue using the headphones.
- If you experience continuous discomfort while using the product, stop using it and consult a doctor.
- We recommend handling the headphones similarly to good sunglasses and keeping them in a safe place between uses.
