JLab Audio Rewind Wireless Headphones
We are glad you like JLab Audio! We pride ourselves on our products and fully stand behind them.
Warranty and Support
YOUR WARRANTY
All warranty claims are subject to manufacturer approval by JLab Audio and at our discretion. Keep proof of purchase to ensure warranty rights.
CONTACT US
Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
REGISTER TODAY
Product Updates | Usage Tips | Frequently Asked Questions and more
First Setup: Bluetooth Pairing
- In the device settings, turn on Bluetooth.
- Press and hold the button for at least 10 seconds. Release the button.
- The indicator light will flash red and blue near the ear cup to show that you are in pairing mode.
In the device settings, select 'JLab Rewind' to connect.
The indicator light will slowly flash blue during Bluetooth pairing.
Visual Description: A smartphone screen displays the Bluetooth settings menu with 'JLab Rewind' ready for connection. The headphones are shown with a flashing LED indicator.
Pairing New / Additional Devices
Turn off Bluetooth on the previously paired device, then turn on Bluetooth on the new device.
For new devices, repeat the FIRST SETUP procedure.
Notes
- Bluetooth is a wireless transmission technology, meaning it is sensitive to objects between the headphones and the connected device. The headphones are designed to be used within a range of 33 feet (10 meters) from the connected device, without major objects between them (walls, etc.).
- Once successfully connected, the headphones will remember your device and automatically pair when turned on. Only one device can be connected at a time. To pair a second device, first disable pairing in the settings of the first device.
- If the Bluetooth connection is lost for any reason, manually reconnect your device via Bluetooth.
Voice Prompts
- POWER ON: Beep
- BLUETOOTH CONNECTED: 2 beeps
- LOW BATTERY: 'Low battery' (less than 20%)
- POWER OFF: Beep
Charging
Note: The headphones will not turn on while charging. Allow approximately 3 hours for a full charge.
Connect the Rewind headphones using the supplied charging cable to a computer or a 5V USB output device.
A red light ? will indicate that charging is in progress, and a blue light ? will indicate that the headphones are fully charged.
Visual Description: A USB cable is shown connecting to the headphones and a USB port. One illustration shows a red light (charging), and another shows a blue light (fully charged).
Button Functions
Bluetooth Pairing:
(Follow first setup instructions)
- POWER ON: Press and hold for 2 seconds
- POWER OFF: Press and hold for 4 seconds (slow blue flashing light indicates headphones are on)
- PLAY / PAUSE ANSWER / HANG UP: 1 click
- ACTIVATE SIRI (iOS) OR 'OK GOOGLE' (ANDROID): 2 clicks
- NEXT TRACK: Press and hold for 2 seconds
Equalizer Modes
CYCLE EQ PRESETS: 3 clicks (Rewind will cycle through 3 EQ presets.)
| Mode | Indicator | Description |
|---|---|---|
| JLab SIGNATURE (One Beep) | 1 ? | Distinctive JLab C3™ sound with enhanced vocals and bass |
| BALANCED (Two Beeps) | 2 ? | Balanced sound with no added bass boost |
| BASS BOOST (Three Beeps) | 3 ? | Enhanced bass and sub-bass |
Caution ⚠️
- Avoid moisture or liquid on the ear cups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the headphones, straining the cable with quick pulls or extreme force, and bending the cable at sharp angles.
- Earwax may accumulate on the ear cups, causing reduced sound quality. Carefully remove wax with a cotton swab or other small tool to restore sound quality.
- If you feel discomfort or pain, try lowering the volume or stop using the headphones temporarily.
- If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
- We recommend treating your headphones like quality sunglasses and storing them safely when not in use.
Purchase Products | Product Announcements | Break in Your Headphones
JLab Audio + Burn-in Tool
Download on the App Store | GET IT ON Google Play
Visit us at: intl.jlabaudio.com
