Bertazzoni Built-In Refrigerator Installation Guide

Product Dimensions

Side View

Overall Height: 80 3/4" (2050 mm) + 1" (25 mm)

Overall Width: 41 7/8" (1065 mm)

Overall Depth: 22 1/16" (560 mm)

Handle Dimension: 5" (127 mm)

Toe Kick Depth: 2 3/4" (70 mm)

Base Depth: 19 5/8" (500 mm)

Cabinet Depth: 5 3/4" (146 mm) + 1" (25 mm)

Front View

Overall Height: 83 1/2" (2120 mm) + 1" (25 mm)

Door Width: 29 5/8" (752 mm)

Upper Section Height: 54 1/4" (1378 mm)

Lower Section Height: 23 1/8" (587 mm)

Wall Clearance: 3/8" (9 mm)

Top View

Overall Depth: 29 15/16" (761 mm)

Overall Width: 7 5/8" (195 mm)

Handle Clearance: 105°

Cabinet Width: 52 3/8" (1331 mm)

Back Clearance: 24 3/16" (615 mm)

* Maximum Overall Handle Dimension

Cutout Dimensions

Front View

Cabinet Height: 83 7/8" (2130 mm) Min.

Cabinet Width: 30" (762 mm)

Clearance for anti-tipping brackets (a): 3"1/2x5" (82x127mm)

Top View

Cabinet Width: 25" (635 mm)

Electrical & Water Connection

Electrical Connection (E)

A properly-grounded, horizontally-mounted electrical receptacle should be installed according to the drawing.

Water Connection (W)

To connect to the water supply system, a 1/4" NPT waterline with accessible shut-off valve must be supplied.

Connection(s) placement within the opening may require additional cabinet depth.

A separate circuit breaker servicing only this appliance is recommended. For installation of multiple products in combination, refer to the Built-in Food Preservation Design Guide.

Dimensions in parentheses are millimeters unless otherwise specified.

Diagrams:

Top View Electrical & Water: Shows placement of E (Electrical) and W (Water) connections.

Front View Electrical & Water: Shows placement of E (Electrical) and W (Water) connections.

Installation Requirements

If the appliance(s) is not connected through the side profile trims to secured cabinetry anti-tip brackets must be installed.