Bertazzoni REF30RCBPNV Installation Details
Product Dimensions
Side View
Width: 21 7/8" (555 mm)
Height: 83 9/16" (2123 mm)
Depth: 1 9/16" (40 mm)
Front View
Height: 83 9/16" (2123 mm)
Depth: 1 9/16" (40 mm)
Top View
Width: 29 3/4" (756 mm)
Depth: 23 5/16" (592 mm)
Panel Width: 16" (406 mm)
Height: 55 1/2" (1409 mm)
* Depth measurement is without the door.
** Maximum Overall Handle Dimension: 3/4" (19 mm) door panel thickness.
Door Swing Angle: Minimum 90°, Maximum 115°.
Cutout Dimensions
Side View
Depicts the side profile of the appliance within a cabinet space, indicated by label 'b'.
Front View
Shows the front opening of the cabinet with required clearance, indicated by labels 'a'.
Minimum Height: 84" (2134 mm)
Width: 30" (762 mm)
Top View
Shows the top view of the cabinet opening.
Depth: 25" (635 mm)
For a 25" (635 mm) flush inset depth:
Maximum door panel thickness: 15/16" (24 mm)
Maximum door panel weight: 66 lbs (30 kg)
(a) Anti-tipping brackets are included with the appliance.
(b) Panel dimensions are available on the Door Panel Specs, Built-in Food Preservation Design Guide, or Installation Manual.
Electrical & Water Connection
Electrical Connection (E): A properly-grounded, horizontally-mounted electrical receptacle should be installed according to this drawing.
Water Connection (W): To connect to the water supply system, use a 1/4" waterline with a minimum length of 60" (1500 mm).
Connection(s) placement within the opening may require additional cabinet depth.
Connection Diagram Details
Top View Diagram: Shows electrical (EE) and water (WW) connection points. Dimension for electrical connection: 2" (50 mm).
Front View Diagram: Shows electrical (EE) and water (WW) connection points. Dimension for electrical connection: 9" (229 mm).
Installation Requirements
If the appliance(s) is not connected through the side profile trims to secured cabinetry, anti-tip brackets must be installed.
