Product Dimensions
Side View
The side view illustrates the overall dimensions of the dishwasher. The height is 3 15/16 inches (100 mm) plus an additional 2 inches (50 mm) for feet adjustment, resulting in a total adjustable height range. The depth from the front to the back is approximately 47 1/4 inches (1200 mm), including the door. The unit has a base with a 2-inch (50 mm) clearance from the floor.
Note: Dimensions in parentheses are in millimeters unless otherwise specified.
Front View
The front view shows the width of the dishwasher, which is 23 9/16 inches (598 mm). The height is 22 1/2 inches (570 mm).
Top View
The top view indicates the width of the dishwasher is 23 9/16 inches (598 mm) and the depth is 22 1/2 inches (570 mm).
The drain hose and toe kick are provided with the unit.
Cutout Dimensions
Side View Cutout
For the side view cutout, the required width is a minimum of 3 1/8 inches (80 mm) and a maximum of 5 1/8 inches (130 mm).
Front View Cutout
The front view cutout specifies a width of 24 inches (610 mm) with vertical side trims installed, or 23 5/8 inches (600 mm) without vertical side trims. An additional dimension of 25 inches (635 mm) is noted for a flush installation, requiring a minimum inset depth of 22 1/2 inches (570 mm).
Top View Cutout
The top view indicates a height range of 34 to 36 inches (864 to 914 mm) for the cutout. The width is 24 inches (610 mm) with vertical side trims, or 23 5/8 inches (600 mm) without.
Electrical & Water Connection
A properly-grounded, horizontally-mounted electrical receptacle should be installed according to the provided diagram. Connections for power (E) and water (W) are indicated on the side and front views.
To connect the water mains to the water inlet valve thread, use a 3/8" water inlet hose and a 3/4" metal adapter with a length of 60" (1524 mm). These are not supplied with the unit.
Connection placement must be located on either side of the cutout.
Installation Requirements
Follow all local codes and ordinances for drain requirements. Install a waste line with an air gap (not supplied) or, alternatively, ensure a minimum 30-inch (762 mm) high drain loop to prevent backflow.
The drain hose is 74 inches (1880 mm) long. The drain hose must be connected at a minimum height of 20 inches (508 mm) from the floor.
