Bertazzoni DW18S2IPV Dishwasher Installation Drawings
Product Dimensions
Side View
Height: 32 1/4"-34 1/4" (820-870 mm), including 2" (50 mm) adjustable feet.
Depth: 21 5/8" (550 mm).
Water Inlet Hose and Metal Adapter: 3 15/16" (100 mm).
Custom Panel Thickness: 3/4" (20 mm) included.
Overall Depth with Custom Panel: 45 2/3" (1160 mm).
Front View
Width: 17 5/8" (448 mm).
Height: 25 1/2" (647 mm).
Minimum inset depth for flush installation with a 3/4" (20 mm) custom door panel: 22 1/2" (570 mm).
Top View
Width: 17 5/8" (448 mm).
Depth: 21 5/8" (550 mm).
Features: Water drain and power inlet are indicated.
Note: Drain hose and toe kick are provided with the unit.
Cutout Dimensions
Side View
Height: 32 1/2"-34 3/8" (824-874 mm).
Front View
Width: 18" (457 mm) or 17 3/4" (450 mm) without vertical side trims.
Top View
Depth: 25" (635 mm).
Electrical & Water Connection
Electrical Connection (E)
A properly-grounded, horizontally-mounted electrical receptacle should be installed according to the drawing.
Water Connection (W)
To connect the water mains to the water inlet valve thread, use a 3/8" water inlet hose and a 3/4" metal adapter with a length of 60" (1524) (not supplied).
Connections placement must be located on either side of the cutout.
Top View (Electrical & Water)
Indicates placement of electrical (EW) and water (EW) connections.
Front View (Electrical & Water)
Indicates placement of electrical (EW) and water (EW) connections.
Custom Panel
Dimensions
Height: 25 1/2"-28 1/4" (647-717 mm).
Width: 17 3/8"-17 9/16" (442-446 mm).
Panel Weight Adjustment
Door tension can be adjusted to accommodate custom panel weights from 7 lb (3 kg) to 13 lb (6 kg).
Suggested panel thickness is 3/4" (20 mm).
Installation Requirements
Follow local codes & ordinances for drain requirements.
Install a waste line with an air gap (not supplied) or, alternatively, at least 30” (762) high drain loop to prevent backflow.
Drain hose is 74” (1880) long. Drain hose must be connected at a minimum 20" (508) from the floor.
Dimensions in parentheses are millimeters unless otherwise specified.