Bertazzoni REF36BMBIPRT Refrigerator Installation Guide

Product Dimensions

Side View

Total Height: 80 3/4" (2050mm)

Depth: 19 5/8" (500mm)

Handle Clearance: 5" (127mm)

Water Line Clearance: 2 3/4" (70mm)

Front View

Total Height: 83 1/2" (2120mm)

Depth: 1" (25mm)

Shelf Height: 18 5/8" (474mm)

Top View

Width: 42" (1068mm)

Depth: 22 1/16" (560mm)

Maximum Overall Handle Dimension: 8 1/8" (206mm)

Width of Door Panel: 3/4" (19mm)

Cutout Dimensions

Side View

Diagram shows appliance profile with handle 'b'.

Front View

Minimum Opening Height: 83 7/8" (2130mm)

Opening Width: 36" (914mm)

Clearance area 'a' is indicated for anti-tipping brackets.

Area for anti-tipping brackets: 3" x 1/2" x 5" (82x127mm).

Top View

U-shaped cutout for appliance: 25" (635mm) wide.

Panel dimensions are available on the Built-in Food Preservation Design Guide or Installation Manual.

Electrical & Water Connection

Electrical (E)

Requires a properly-grounded, horizontally-mounted electrical receptacle, installed according to the drawing.

Water (W)

Requires a 1/4" NPT waterline with an accessible shut-off valve.

Connection placement within the opening may require additional cabinet depth.

Recommendation: A separate circuit breaker servicing only this appliance is recommended. For installation of multiple products in combination, refer to the Built-in Food Preservation Design Guide.

Installation Requirements

If the appliance(s) is not connected through the side profile trims to secured cabinetry, anti-tip brackets must be installed.