WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Parts List
| Part | Description | Quantity | Part Number(s) |
|---|---|---|---|
| Screw/Bolt Assembly | Main assembly screws | 28x | 100229 / 100232 |
| Dowel | Wooden dowel | 52x | 101350 |
| Screw | Small screw for slides | 24x | 100349 |
| Screw | Medium screw | 1x | 109049 |
| Washer | Flat washer | 2x | 100823 |
| Foot | Furniture foot | 8x | 153549 |
| Bracket | Mounting bracket | 1x | 106989 |
| Allen Key | Hex key | 1x | 100006 |
| Drawer Slide Components | Parts for drawer slides | 24x | 120056 / 130379 |
Assembly Steps
Insert wooden dowels (101350) into the pre-drilled holes on the edges of six (6) long panels. Use 2 dowels per panel.
Insert wooden dowels (101350) into the pre-drilled holes on the edges of three (3) wider panels. Use 8 dowels per panel.
Attach one of the wider panels (from step 2) to the back panel. Use one set of screws (100229, 100232) and the allen key (100006). The diagram shows a single screw being inserted.
Insert horizontal support pieces into the slots on the back panel. Arrows indicate insertion direction.
Attach another wider panel (from step 2) to the back panel. Use five sets of screws (100229, 100232).
Attach a front panel (from step 1) to the assembled structure. Use one set of screws (100229, 100232).
Insert horizontal support pieces into the slots on the side panels. Secure with two sets of screws (100229, 100232).
Attach another front panel (from step 1) to the structure. Use three sets of screws (100229, 100232).
Attach the final front panel (from step 1) to the structure. Use one set of screws (100229, 100232).
Insert horizontal support pieces into the slots on the side panels. Secure with two sets of screws (100229, 100232).
Insert wooden dowels (101350) into the top edges of the side panels. Use 4 dowels.
Attach a top panel to the side panels. Use four dowels (101350) and corresponding screws.
Slide the back panel into its designated groove. A [circular-arrow] indicates the direction of movement.
Secure the back panel to the structure using four sets of screws (100229, 100232).
Attach horizontal support pieces to the side panels. Use two dowels (101350) and four screws (100229, 100232).
Insert drawer runners/supports into the main frame. [Arrow-right] and [arrow-left] indicate insertion direction.
Attach drawer runners/supports to the side panels using nine sets of screws (100229, 100232).
Attach the furniture feet (153549) to the bottom of the unit. Use eight feet.
Attach drawer slide components (120056, 130379) to the inside of the unit using small screws (100349).
Attach the final drawer slide/runner components (106989) to the main frame. Use one set of screws (109049) and washers (100823).
