STRÅLA
by IKEA
Important Safety Information
- Always remove batteries before storing.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- Only use batteries that are intended for the product. Do not mix old and new batteries, different brands or types.
Assembly Instructions
The STRÅLA lamp requires assembly. Please follow these steps:
Step 1: Attach the first pole section to the base.
Diagram Description: The circular, textured base is shown. A long pole section, with connectors at both ends, is being inserted upwards into the base. Arrows indicate the direction of insertion.
Step 2: Connect the second pole section and attach the lamp head structure.
Diagram Description: The first pole section is attached to the base. A second, shorter pole section is being attached to the top of the first pole. The main structure of the lamp head, which will hold the shades, is shown being connected to the top of the assembled pole. Close-up views illustrate how these parts align and secure.
Step 3: Secure the lamp head structure to the pole.
Diagram Description: The assembled pole is now fully connected to the base. The lamp head structure is being further attached or secured onto the top of the pole.
Step 4: Attach the three spherical shades.
Diagram Description: The assembled lamp structure is shown. Three spherical shades, each featuring horizontal lines, are being attached to the lamp head structure. Close-up views detail how the shades connect to the frame.
Step 5: Connect the power wire.
Diagram Description: The lamp with shades is assembled. The power wire extending from the lamp head is being guided down through the pole towards the base. A close-up view shows the wire being fed into the base unit.
Step 6: Secure the lamp head assembly to the base.
Diagram Description: The power wire is connected. The lamp head assembly is being pressed down onto the base, indicated by downward arrows. A 'Click!' sound is depicted, signifying a locking mechanism engaging.
Battery Installation
This lamp is battery-operated.
Step 1: Open the battery compartment cover.
Diagram Description: A finger is shown lifting a small cover on the base of the lamp, revealing the battery compartment.
Step 2: Insert batteries.
Diagram Description: Three AA batteries are depicted. Arrows indicate they should be inserted into the compartment, observing the correct polarity (+ and -).
Step 3: Close the battery compartment cover.
Diagram Description: The battery compartment cover is being closed, with a finger pressing it down.
Important: Do not mix old and new batteries, or batteries of different brands or types. ?❌
Operation
This luminaire features an automatic timer function.
The timer switches the light off automatically after 6 hours and switches it back on at the same time the next day. ⏱️?
