Important Safety Information
⚠️ WARNING! Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this furniture must be used with the wall anchoring device(s) included. Wall screws and plugs are not included. Use screws and plugs suitable for your walls. If you are unsure, seek professional advice. Read and follow each step of the instructions carefully.
Tools Required
- Screwdriver [?]
- Spirit Level [?]
- Ladder [?]
Parts Included
- 2x Connector Bracket (10042610)
- 2x Connector Bracket (10046296)
- 2x Connector Bracket (10046297)
- 2x Connector Bracket (10042543)
- 2x Connector Bracket (10046300)
- 2x Connector Bracket (10046304)
- 2x Connector Bracket (1004278)
- 2x Connector Bracket (10042543)
- 2x Connector Bracket (10046300)
- 2x Connector Bracket (10046304)
- 1x Connector Bracket (10042612)
- 1x Connector Bracket (10046271)
- 1x Connector Bracket (10046292)
- 1x Connector Bracket (10108698)
- 4x Connector Bracket (10108698)
- 2x Connector Bracket (10042526)
- 2x Connector Bracket (10120505)
- 1x Connector Bracket (10042625)
- 1x Connector Bracket (10046294)
- 1x Connector Bracket (10046295)
- 2x Connector Bracket (10094315)
- 2x Connector Bracket (100823)
- 2x Connector Bracket (10046275)
- 2x Connector Bracket (100644)
- 2x Connector Bracket (100402)
- 2x Connector Bracket (101349)
Assembly Steps
Step 1
Two people carefully lift and position a large wardrobe panel.
Step 2
Attach connectors to the designated points on the wardrobe panels.
Step 3
Connect two wardrobe panels together, aligning the connectors.
Step 4
Continue connecting wardrobe panels to form the main structure.
Step 5
Attach 4x Connector Brackets (10108698) to the wall using appropriate screws and plugs. Ensure they are level.
Step 6
Attach the wardrobe panels to the wall-mounted connector brackets.
Step 7
Secure the base of the wardrobe panels.
Step 8
Shows correct and incorrect methods for handling wardrobe panels. Ensure panels are handled upright and not tilted excessively.
Step 9
Attach more connector brackets to the wall or existing panels as required.
Step 10
Attach more connector brackets, ensuring proper alignment.
Step 11
Using a ladder [?], attach a component (likely a hinge or bracket) to the top of the wardrobe structure.
Step 12
Attach further components to the wardrobe frame.
Step 13
Attach the top panel of the wardrobe. Ensure correct alignment and secure it.
Step 14
Attach more connectors to the top section of the wardrobe.
Step 15
Attach more connectors to the wardrobe structure.
Step 16
Secure the base of the wardrobe with screws.
Step 17
Attach a component to the base of the wardrobe.
Step 18
Attach final components. ? STOP: Ensure the maximum thickness of the wall plug/screw used does not exceed 22 mm (7/8").
Step 19
Attach final components to the top of the wardrobe.
Step 20
Secure panels by ensuring connectors click into place.
Step 21
Insert shelves or drawers into the assembled wardrobe frame.
Step 22
Detail showing drilling for wall anchoring: Use a drill bit of Ø 5 mm (3/16"). Insert wall plugs (5) and screws (6) into the wall and the wardrobe frame.
