Paslode PPNXi Specialist Nailer

Congratulations

Thank you for choosing a Paslode tool. The PPNXI specialist nailer provides an efficient safe way of installing hangers, brackets and straps. The tool accurately delivers a hardened twist nail in the precise required location.

Technical Data

In Your Kit

• PPNXi Specialist Nailer
• Lithium Battery
• Lithium Battery Charger
• Safety eye protection to EN166-F standard
• Allen Key
• Instruction Manual
• Tool Schematics
• Safety Instructions
• CE & UKCA Declaration of Conformity

Consumables You Need

• Hardened Twist Nails: diameter 3.4 mm, length 35mm
• Series-i Fuel Cell (Model 300348)

Extra Accessories

• Li-ion Battery (Model 018880)
• Battery Cleaning Kit (Model 013690)
• Battery Charger (Model 018882)

Refer to www.paslode.co.uk for further information on your tool and FAQ.

Safety Recommendations & Warnings

Please adhere to safety recommendations and warnings at all times.

Index:

• Getting Started: Pages 4-5
• Tool Lights: Page 5
• Tool Adjustment: Pages 6-7
• Tool Maintenance: Pages 8-9
• Trouble Shooting: Page 10
• Paslode Range: Page 11

Getting Started: Fuel Cell

Required Consumables:

• PPNXi Specialist Nailer
• Hardened Twist Nails: diameter 3.4 mm, length 35mm
• Series-i Fuel Cell (1250 shots at -5°C)

Steps:

1. Check fuel is in date (see base of fuel cell).
2. Insert the fuel cell into the tool. It will click into place.

Getting Started: Battery

Battery Capacity: Up to 13000 shots per charge.

Charging Times:

• 15 minutes: Up to 2,500 shots
• 60 minutes: Up to 10,000 shots
• 90 minutes: Up to 13,000 shots

Battery Indicator: The battery has indicator lights showing charge level: 25%, 50%, 75%, 100%.

Resting Position: If you need to rest or place the tool down, please place it in the designated resting position (tool angled slightly upwards, nose resting on a stable surface).

Tool Adjustments

Operating Temperature Range: -15°C to +49°C.

Capacity: Up to 1,000 fixings per hour, 3,300 per day.

Rotating Belt Hook: The belt hook can be rotated for convenience.

Depth of Drive Adjustment:

Use the adjustment dial to control the depth of the nail:

• Turn dial towards [depth-increase] to drive nails deeper.
• Turn dial towards [depth-decrease] to drive nails shallower.

Actuating the Tool

Ensure the tool is at the correct angle to the work surface (between 0° and 30° from perpendicular).

Steps:

1. Place the tool nose against the work surface.
2. Press the trigger.
3. The tool will fire a nail ("Bang!").

Tool Maintenance: Filter

Required: Cleaning Kit (Model 013690).

Steps:

1. Disassemble the tool as shown in the diagrams (refer to steps 1-12).
2. Clean the filter using the cleaning kit.
3. Reassemble the tool.

Tool Maintenance: Fan

Required: Cleaning Kit (Model 013690) and O-ring (Model 013231).

Steps:

1. Disassemble the tool as shown in the diagrams (refer to steps 13-23).
2. Clean the fan components using the cleaning kit.
3. Replace the O-ring if necessary.
4. Reassemble the tool.

Maintenance Light Reset

The tool will flash green/red once it has fired 50,000 shots, indicating maintenance is due.

To reset the maintenance light:

1. Ensure maintenance has been carried out on the tool.
2. Hold the start button for more than 10 seconds.

Trouble Shooting

Issue: How to Clear a Nail Jam

Follow the steps outlined in the 'Getting Started' section (Page 4) and 'Tool Maintenance' section (Pages 8-9) for disassembly and clearing jams.

Issue: Trigger Works However Fan Not Working and No Nail Comes Out

Check fuel cell insertion (Page 4), battery charge (Page 5), and ensure the tool is not jammed (refer to maintenance pages 8-9).

Issue: Trigger & Fan Working However No Nail Comes Out

Verify nail loading (Page 4), fuel cell status (Page 4), and check for obstructions (Pages 8-9).

Issue: Fan Works and Explosion Happens However No Nail

This indicates a potential issue with nail feeding or seating. Check the nail magazine (Page 4), fan assembly (Pages 8-9), and depth of drive adjustment (Page 6).

Refer to www.paslode.co.uk for further information on your tool and FAQ.

Paslode Range

Framing

Paslode Framing systems have been the cornerstone of first fix carpentry across the globe for over 30 years, minimising user fatigue and downtime on site.

Finishing

Paslode finish nailing systems offer the lightest and most compact range of reliable tools on the market. With precision in tight spaces, they ensure each brad is consistently driven flush, which guarantees a high-quality finish.

Specialist

Paslode Specialist systems offer a lightweight, versatile alternative to hand nailing. They have the power to deliver a secure fixing whilst reducing installation time and labour on site.

Featured Models:

• 360XI
• IM65
• PPNXi
• IM350+
• IM65A
• IM50
• IM45 GN

Warranty

Paslode tools have a standard 2-year warranty, covering all components. This warranty is valid provided that Manufacturer's Operating Instructions have been followed, no modifications have been made, non-original components or spare parts have not been used, and the tool has not been accidentally damaged or neglected.