Paslode IM350+ Lithium Cordless Framing Nailer
This manual provides instructions for the safe and effective use of the Paslode IM350+ Lithium cordless framing nailer.
Safety Precautions
Always wear appropriate safety gear, including safety glasses ?, hearing protection ?, and gloves ?. Never point the nailer at yourself or others. Ensure the work area is clear of obstructions and bystanders. Do not operate the tool if damaged. Keep away from children. Do not use in wet conditions. Avoid exceeding 50°C (122°F) operating temperature. ⚠️
Key Safety Symbols:
- No unauthorized personnel: ?
- Maximum temperature: >50°C ?️
- Warning: ⚠️
- No smoking: ?
- Eye protection required: ?️
- Hearing protection required: ?
- Gloves required: ✋
Product Overview
The Paslode IM350+ Lithium is a powerful and reliable cordless framing nailer designed for professional use. It utilizes Paslode's Impulse® technology for efficient nailing.
Key Features:
- Cordless operation for maximum mobility.
- Lithium-ion battery for extended power.
- Durable construction for demanding job sites.
- Designed for 30° paper collated nails.
Nail Specifications
The IM350+ Lithium is compatible with Paslode RounDrive® nails:
- Diameter: Ø 2.8 mm to 3.1 mm
- Length: 51 mm (Ring) to 90 mm (Smooth)
- Head Type: Dhead
Nail Capacity:
- Approximately 1100 nails per battery charge.
- Approximately 10,000 nails per gas fuel cell.
Operation Instructions
Turning the Tool ON/OFF
To Turn ON: Click the power button twice to the ON position. The indicator light will illuminate. ▶️
To Turn OFF: Click the power button twice to the OFF position. The indicator light will extinguish. ⏹️
Loading Nails and Fuel
- Open the magazine by pressing the release button.
- Insert a strip of Paslode 30° nails into the magazine, ensuring they are seated correctly.
- Close the magazine until it clicks shut.
- Insert a Paslode gas fuel cell into the designated compartment.
Nailing Procedure
- Ensure the tool is switched ON.
- Place the nose of the nailer firmly against the work surface.
- Press the trigger to drive a nail. BANG! ?
- For sequential tripping (single shot), ensure the contact tip is depressed before pulling the trigger.
- For bump firing (continuous nailing), hold the trigger down and bump the contact tip against the work surface. BZZZZZ!
Battery Charging
Use only the Paslode-approved charger. Connect the battery to the charger and plug it into a power outlet. The charging indicator light will show the charging status. A full charge typically takes [time].
Battery Life:
- Approximately 1100 nails per charge.
Maintenance and Cleaning
Regular maintenance ensures optimal performance and longevity of the tool.
- Cleaning the Nose and Magazine: Periodically clean the nose and magazine area to remove debris. Use a soft cloth and compressed air if available.
- Lubrication: Apply Paslode lubricant to the specified points as per the maintenance schedule. ⚙️
- Battery Care: Store batteries in a cool, dry place. Avoid extreme temperatures.
Recommended Maintenance Schedule:
- After every 5000 nails: Clean the nose and magazine.
- After every 10,000 nails: Lubricate the tool.
- After every 20,000 nails: Service the tool (refer to authorized service center).
Troubleshooting
Nail Jam: If a nail jams, turn the tool OFF, remove the battery and fuel cell, and carefully clear the jam using the provided tool or a suitable object. Ensure the nail strip is correctly loaded.
Tool Not Firing: Check battery charge, fuel cell level, and ensure the safety mechanism is not engaged. Verify the contact tip is depressed.
Weak Nailing: Ensure the battery is fully charged and the fuel cell is not empty. Check for any obstructions in the air passages.
Technical Specifications
| Specification | Value |
|---|---|
| Model | IM350+ Lithium |
| Nail Type | 30° Paper Collated |
| Nail Diameter | 2.8 mm - 3.1 mm |
| Nail Length | 51 mm - 90 mm |
| Magazine Capacity | [Number] nails |
| Battery Type | Lithium-ion |
| Fuel Source | Paslode Gas Fuel Cell |
| Weight | [Weight] kg |
| Dimensions | [Dimensions] mm |
| Operating Temperature | -5°C to +40°C |
| Nails per Charge | ~1100 |
| Nails per Fuel Cell | ~10,000 |
Contact Information
For service, support, or to purchase accessories, please contact Paslode or an authorized Paslode dealer.
Manufacturer: Paslode
Website: www.paslode.com
