Paslode Cordless Framing Nailer
Models: CF325XP (Part No. 905600), B20543P (Part No. 905700), CF325IM (Part No. 905800)
Overview and Accessories
This document provides schematic diagrams and a parts list for the Paslode Cordless Framing Nailer. It also lists available accessories.
Diagram: An exploded view diagram shows the Paslode cordless framing nailer disassembled into its key components, illustrating how they fit together. The diagram is presented in both French ('Explosé de pièces de l'outil - Cloueuse à charpente sans fil') and English ('Tool Schematic and Parts - Cordless Framing Nailer').
Accessories
- Battery
- Battery Charger
- Battery Charger system (Australia/ New Zealand)
- Paslode Cordless Lubricating Oil: Specially formulated for use in Paslode® Cordless tools.
- 5/32" Hex Key: For clearing jams and servicing.
- No-Mar Work Contacting Element: Rubber tipped WCE to eliminate marring work surface.
- Paslode Cordless Nailer Case
- Clear Safety Glasses
- Cordless Tool Cleaner/Degreaser: Ideal cleaner for all Paslode® tools.
Important Notes: It is the customer's responsibility to ensure all operators and service personnel read and understand this manual. DO NOT DESTROY.
Tool Schematic and Parts List
Diagram: A detailed schematic diagram illustrates the internal workings of the Paslode cordless framing nailer. Components are numbered corresponding to the parts legend, showing their precise locations and assembly. The diagram includes various internal mechanisms such as the fuel system, firing mechanism, and housing components.
Parts Legend
| Item | Part Number | Description |
|---|---|---|
| 1 | 902285 | Grille, Black |
| 2 | 900315 | Filter |
| 3 | 900902 | Screw, Thread Forming Sems 8-32 x 5/8 |
| 4 | 902637 | Limiter |
| 5 | 902644 | Screw, Thread Forming Sems 8-32 x 5/8 |
| 6 | 900468 | Washer, Motor Shaft |
| 7 | 901063 | Shoulder Screw 10-24 x 1-1/2 |
| 8 | 904517 | Fuel Barb |
| 9 | 401356 | Motor Sleeve |
| 10 | 900286 | Spark Plug Assembly, includes O-Ring |
| 11 | 902215 | Fuel Tube |
| 12 | 404453 | Bracket, Cylinder Head |
| 13 | 902210 | Fuel Dosing Lever |
| 14 | 902209 | Fuel Door |
| 15 | 902230 | Pin, Fuel Door |
| 16 | 902235 | Retaining Ring, Fuel Door |
| 17 | 902221 | Cylinder Head |
| 18 | 900935 | Seal Ring |
| 19 | 403167 | Fan Blade Assembly |
| 20 | 902604 | Spark Unit Assembly |
| 21 | 902625 | Molded Circuit Assembly |
| 22 | 900478 | Spark Plug Assembly Wire |
| 23 | 900231 | Clip, Wire Spark Plug |
| 24 | 403987 | Screw Thread Forming 6-32 x 1/4 |
| 25 | 902606 | Handle Assembly Kit - Right & Left |
| 26 | 404448 | Roller Lever Assembly |
| 27 | 404702 | Screw Thread Forming 6 x 3/8 |
| 28 | 404436 | Nail Channel |
| 29 | 902623 | Cover Plate Magazine |
| 30 | 901222 | Shoulder Screw 10-32 x 1/2 |
| 31 | 902206 | Cap, Black |
| 32 | 404412 | Wear Plate, Chamber Lock |
| 33 | 900453 | Screw Plastite 8-16 x 7/8 |
| 34A | 902608 | Warning Label (USA) |
| 34B | 904801 | Warning Label (Canada) |
| 35A | 902220 | Magazine Channel (USA)(CANADA) |
| 35B | 902216 | Magazine Channel (ANZ) |
| 36 | 900594 | S.H.C.S. Sems 8 - 32 x 1/2 |
| 37 | 901241 | Stop, Cage |
| 38 | 404451 | Lockout Bar, Follower |
| 39A | 902219 | Shear Block (USA)(CANADA) |
| 39B | 902262 | Shear Block (ANZ) |
| 40 | 901238 | Spring, Flat |
| 41 | 404435 | Trigger |
| 42 | 900269 | Chamber Lock Bar |
| 43 | 404927 | Spring, Trigger |
| 44 | 401328 | Retainer ring |
| 45 | 401461 | Piston Ring |
| 46 | 404485 | Piston Assembly,includes rings |
| 47 | 902233 | Combustion Chamber Assembly |
| 48 | 404827 | Pin |
| 49 | 905601 | Bumper |
| 50 | 902239 | Spring |
| 51 | 900934 | Steel Ring, Sleeve |
| 52 | 905623 | Sleeve Assembly, includes rings |
| 53 | 404464 | Rubber Stop |
| 54 | 404424 | Reed Valve |
| 55 | 404422 | Muffler |
| 56 | 404423 | Muffler Cover |
| 57 | 902227 | Utility Hook Button |
| 58 | 900596 | Screw Thread Forming Sems 8-32 x 7/16 |
| 59 | 403816 | Socket Head Capscrew 10-24 x 1-1/8 |
| 60 | 404445 | Bushing, Shear Block |
| 61 | 902249 | Wear Plate, Nose |
| 62 | 901249 | Upper Probe |
| 63 | 902225 | Lower Probe |
| 64 | 900592 | S.H.C.S. Sems 10-32 x 1/2 |
| 65 | 401380 | Tie Bar |
| 66 | 902211 | Fuel Pivot Arm |
| 67 | 905603 | Housing Assembly |
| 68 | 902237 | Utility Hook |
| 69 | 905609 | Label, Paslode®, Left |
| 70A | 905611 | Label, Silver, Left (USA) |
| 70B | 905615 | Label, Paslode®, Right |
| 71 | 902240 | Retainer Ring, Sleeve |
| 72 | 900593 | S.H.C.S. Sems 10-24 x 5/8 |
| 73 | 403985 | Follower |
| 74 | 900520 | Follower Bushing Spring Assembly |
| 75 | 901202 | Retaining Ring |
| 76 | 403986 | Spring Pin |
| 77 | 902204 | Follower Guide |
| 78 | 902205 | Follower Button |
| 79 | 404457 | Spring |
| 80 | 904571 | Foam Pad |
| 81 | 902619 | Probe Release |
| 82 | 902620 | Button, Probe Release |
| 83 | 404426 | Exhaust Baffle |
| 84 | 404425 | Reed Plate |
| 85 | 900969 | Torx Screw 8-32 x 5/8 |
| 86 | 900481 | O-Ring |
| 87 | 902222 | Combustion Chamber Ring |
| 88 | 404407 | Combustion Chamber |
| 89 | 900595 | Torx Screw Sems 8-32 x 3/8 |
| 90A | 905606 | Fuel Block (USA) |
| 90B | 902231 | Fuel Block (ANZ) |
| 91A | 905612 | Nameplate (USA) |
| 91B | 905616 | Nameplate (ANZ) |
| 91C | 904814 | Nameplate (CANADA) |
| 92 | 900427 | Light Pipe |
| 93 | 902607 | Li-ion Fuel Label |
| 94 | 404411 | Spring |
| 95 | 900546 | Brass Insert |
| 96 | 900597 | Screw Thread Forming Sems 6-19 x 3/8 |
| 97 | 902238 | Utility Hook Spring |
| 98 | 902213 | Pin Fuel Arm Pivot |
| 99 | 902295 | Fuel Door Assembly |
| 100 | 905608 | Label, Paslode®, Right |
| 101A | 905610 | Silver Label, Right (USA) |
| 101B | 905614 | Silver Label, Right (ANZ) |
Safety Instructions
Always wear hearing protection and eye protection devices, including side shields, when operating or working in the vicinity of a tool.
WARNING: All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard.
Torque Values
Torque values are mentioned in the document, but specific numerical values are not provided in a clear table format.
Notes:
- Note 1: Sleeve positioned with ribs contacting motor shell.
- Note 2: Install probe release buttons (item 82) onto the probe release (item 81) with the finger grips facing outward.
- Note: Ring openings to be 180° apart.
