Assembly Instructions

Tribesigns Shoe Cabinet

Model No.: HOGA-NY260, NY315

Designed for Life

Contact Us

We're here to help you.

✉️ Email: support@tribesigns.com

? Phone: 1-424-220-6888 (Contact us anytime except 12:00 AM to 8:00 AM EST.)

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.

Warm Tips

? Carefully read these instructions and keep them for future reference.
✅ Check the parts list and confirm everything's there before starting assembly.
?️ When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
↔️ Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

How to Get the Assembly Video

Step 1: Scan the QR code for the installation video.

Step 2: Search with the Model No. (HOGA-NY260) on the website.

Note: If you can't find the assembly video, please contact customer service.

Tools and Preparation

?️ We recommend using hand tools for assembly.

⚠️ If an electric screwdriver is used, reduce power and torque to avoid damage to the product.

? Two people are recommended for assembly.

Install the Anti-Tip Straps

Using the anti-tip straps can reduce the risk of tipping over, but cannot eliminate it.

Diagram shows correct installation (checkmark ✔️) and incorrect installation (cross mark ❌) of anti-tip straps on the cabinet.

Parts List

Part No.	Description	Quantity
1	Top Panel	1 pc
2	Bottom Panel	1 pc
3	Left Side Panel	1 pc
4	Right Side Panel	1 pc
5	Back Panel Support/Base	1 pc
6	Shelves	4 pcs
7	Drawer Front Support	1 pc
8	Drawer Sides	2 pcs
9	Doors	2 pcs
10	Drawer Bottom/Front Panel	1 pc
11	Drawer Backs	2 pcs
12	Drawer Base	1 pc
13	Drawer Top/Shelf	1 pc

Hardware List

ID	Description	Quantity
A	Cam Bolts	23 pcs
B	Cam Locks	23 pcs
C	Dowels	11 pcs
D	Screws	7 pcs
E	Small Screws	3 pcs
F	Hinges	13 pcs
G	Hinge Screws	13 pcs
H	Shelf Pins	17 pcs
I	Screws	39 pcs
J	Handles	4 pcs
K	Handle Screws	4 pcs
L	Anti-tip Strap Kit	1 pc
M	Drawer Slides (part 1)	2 pcs
N	Drawer Slides (part 2)	2 pcs

Assembly Steps

Step 1: Installation of Cams and Pins

Screw the pin (A) into the designated hole. To set the cams correctly, ensure that the arrow on the cam (B) is opening towards the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver (?) until it is tightened. Do not use an electric screwdriver. Ensure there is 'No gap' between parts.

Visual: Diagram shows inserting pin A, then cam B, and turning cam B with a screwdriver. A separate diagram shows correct pin insertion ('No gap' ✔️) versus incorrect insertion (❌).

Step 2: Attaching Panels

Attach panels 1, 2, 3, 4, 10, and 12 using screws (A). Install drawer slides (N-1, N-2) onto the designated panels using screws (I) and (K).

Visual: Diagrams show panels being joined with screws (A). Drawer slides (N-1, N-2) are shown being attached to panels labeled 3 and 4 using screws (I) and (K).

Step 3: Attaching Part 5 to Part 3

Attach part 5 to part 3 using screws (I) and (M).

Visual: Diagram shows part 5 being attached to part 3 with screws (I) and (M).

Step 4: Assembling Cabinet Base

Attach part 5 to part 4 using screws (B) and (C). Then, attach part 2 to parts 3 and 4 using dowels (C) and cam locks (B).

Visual: Diagrams show part 5 attached to part 4. Part 2 is shown being connected to parts 3 and 4 using dowels and cam locks.

Step 5: Installing Drawer Front Support

Insert part 7 into the assembled frame using hardware B.

Visual: Diagram shows part 7 being inserted into the cabinet structure.

Step 6: Installing Drawer Sides

Insert drawer sides (8) into the cabinet structure.

Visual: Diagram shows parts 8 being slid into place within the cabinet.

Step 7: Attaching Top Panel

Attach the top panel (1) to the cabinet structure using cam locks (B) and dowels (C).

Visual: Diagram shows top panel (1) being placed and secured with cam locks and dowels.

Step 8: Attaching Doors

Attach doors (9) to the cabinet using hinges (F) and screws (G).

Visual: Diagrams show hinges (F) being attached to doors (9) and then to the cabinet frame using screws (G).

Step 9: Assembling Drawer Box

Assemble the drawer box by connecting drawer sides (11) and back (12) to the drawer base (13) using hardware B.

Visual: Diagram shows parts 11 and 12 being attached to part 13 using cam locks (B).

Step 10: Attaching Drawer Slides to Drawer Box

Attach the drawer slides (N) to the assembled drawer box using hardware B.

Visual: Diagram shows drawer slides (N) being attached to the sides of the drawer box.

Step 11: Assembling Drawer Structure

Assemble the main drawer structure using parts 10, 11, 12, and 13, secured with hardware D and E.

Visual: Diagram shows parts 10, 11, 12, 13 being joined to form the drawer box, using screws D and E.

Step 12: Attaching Drawer Front

Attach the drawer front panel (10) to the drawer box using hardware N-2 and I.

Visual: Diagram shows the drawer front panel being attached to the assembled drawer box.

Step 13: Inserting Drawer

Insert the assembled drawer into the cabinet.

Visual: Diagram shows the drawer being slid into the cabinet.

Step 14: Inserting Shelves

Insert shelves (6) into the cabinet using shelf pins (H).

Visual: Diagram shows shelf pins (H) being placed into the cabinet holes, and shelves (6) resting on them.

Step 15: Attaching Hinges to Doors

Attach hinges (J) to the doors (9) using screws (D) and (I). Also attach the other part of the hinges to the cabinet using screws (E).

Visual: Diagrams show hinges (J) being screwed onto doors (9) and then onto the cabinet frame.

Step 16: Attaching Doors to Cabinet

Attach the doors (9) to the cabinet frame using the previously attached hinges (I).

Visual: Diagram shows the doors being mounted onto the cabinet.

Step 17: Installing Anti-Tip Strap

Install the anti-tip strap (L) by securing one end to the cabinet and the other end to the wall, following the provided steps.

Visual: Diagrams show Step 1 (attaching bracket to wall), Step 2 (attaching bracket to cabinet), and Step 3 (connecting strap).

Step 18: Final Assembly Check

Ensure all parts are securely fastened and the cabinet is stable.

Visual: Illustration of the completed shoe cabinet.

Step 19: Final Product View

Illustration of the completed shoe cabinet.

Step 20: Final Product View