Tribesigns

DESIGNED FOR LIFE

Assembly Instructions

A line drawing of a dining table with a distinctive V-shaped pedestal base and a rectangular top.

Dining Table

Model No.

HOGA-JW0669/HOGA-JW0752
HOGA-JW0879/HOGA-JW1043

Little Tree by Tribesigns

Website: www.tribesigns.com

Contact Us

We're here to help you.

Email: support@tribesigns.com

Phone: 1-424-220-6888

Contact hours: 7 AM to 8 PM EST, Monday to Friday.

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact Tribesigns customer service as soon as possible.

Warm Tips

Carefully read these instructions and keep them for future reference.
Check the parts list and confirm everything's there before starting assembly.
When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

How to Get the Assembly Video

Step 1: Scan the QR code provided in the original document for the installation video.

Step 2: Alternatively, search YouTube for "Tribesigns Installation Guide" and use the Model No. (found on the bottom left corner of the title page, e.g., HOGA-JW0669) to find the specific video.

Note: If you can't find the assembly video, please contact customer service.

Tools Recommended

Quantity: 2 people recommended for assembly.

Illustrations of a wrench and a screwdriver.

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product.

Illustrations showing parts laid out, a person looking confused, then a person reading instructions and assembling parts on a soft surface.

Important Caution

Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact Tribesigns for a free replacement if you encounter any damaged or missing parts.

An exploded view diagram showing the main components of the dining table, labeled with numbers 1 through 6.

Parts List

Part No.	Description	Quantity
1	Tabletop Panel	2 pcs
2	Middle Panel	1 pc
3	Leg Support Panel	2 pcs
4	Leg Support Panel	2 pcs
5	Leg Support Panel	4 pcs
6	Base Panel	1 pc

Hardware List

Label	Description	Quantity	Dimensions
A	Screw	X24+1	Ø6X35 mm
B	Cam Lock	X24+1	Ø15X12 mm
C	Dowel	X32+1	Ø8X30 mm
D	Screw	X2+1	Ø10X50 mm
E	Screw	X8+1	Ø7X47 mm
F	Screw	X8+1	Ø7X67 mm
G	Bolt	X12+1	M6X30 mm
H	Bolt	X4	M6XØ30 mm
I	Screw	X1	M4X64 mm

Assembly Steps

Step 1

Attach two Part 3 panels to two Part 4 panels using hardware A (screws, Ø6X35 mm) in the pre-drilled holes. This creates two leg structures.

Step 2

Connect two Part 5 panels to the assembly from Step 1 using hardware B (cam locks) and C (dowels). Repeat for the other side. Ensure the cam locks are oriented correctly to receive the dowels.

Step 3

Attach Part 2 (middle panel) to the top of the leg assemblies using hardware B (cam locks) and C (dowels).

Step 4

Attach the two Part 1 panels (tabletop halves) to the top of the leg structures using hardware C (dowels) and E (screws, Ø7X47 mm).

Attach Part 6 (base panel) to the bottom of the leg structures using hardware F (screws, Ø7X67 mm).

Step 5

Secure the two Part 1 panels together and to the leg structure using hardware C (dowels) and F (screws, Ø7X67 mm).

Step 6

Secure the base panel (Part 6) to the leg structure using hardware H (bolts, M6XØ30 mm).

Step 7

Join the two Part 1 panels (tabletop halves) together using hardware D (screws, Ø10X50 mm).

Step 8

Attach the assembled leg structure to the base panel (Part 6) and the tabletop (Part 1) using hardware G (bolts, M6X30 mm).

Thank You

Thank you for your support!