Assembly Instructions
Shoe Cabinet
Model No. HOGA-F1880/F2132
Thank you for your support!
Contact Information
Phone: 1-424-206-5666
Email: support@yuzhouint.com
Support Hours:
- EN: 1:00 PM to 1:00 AM GMT, Monday to Friday.
- DE: 14:00 - 02:00 Uhr (MEZ), von Montag bis Freitag.
- IT: Dalle 14:00 alle 2:00 CET, dal lunedì al venerdì.
- FR: De 14 h à 2 h (UTC+1), du lundi au vendredi.
- ES: De 14:00 a 02:00 horas (CET+1.), de lunes a viernes.
Warm Tips
- Carefully read and keep these instructions for later.
- Before assembling, ensure all parts and accessories are there.
- Assemble on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten the screws until everything is correctly in place.
Assembly Recommendations
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce its power to protect the product.
Anti-Tip Straps
Install the anti-tip straps to reduce the risk of tipping over. While they can reduce the risk, they cannot eliminate it entirely.
Caution
Check all parts. Most board parts are labeled on the edge. Contact us for a free replacement if any are damaged or missing.
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | Top Panel | 1 pc |
| 2 | Side Panel | 1 pc |
| 3 | Side Panel | 2 pcs |
| 4 | Back Panel | 1 pc |
| 5 | Bottom Panel | 1 pc |
| 6 | Shelf | 1 pc |
| 7 | Leg | 4 pcs |
| 8 | Door Panel | 2 pcs |
| 9 | Drawer Front | 3 pcs |
| 10 | Drawer Side | 1 pc |
| 11 | Drawer Back | 1 pc |
| 12 | Drawer Bottom | 1 pc |
| 13 | Drawer Slide Rail | 1 pc |
| 14 | Drawer Slide Rail | 1 pc |
| 15 | Drawer Handle | 1 pc |
| 16 | Hinge | 2 pcs |
Hardware List
| Label | Description | Quantity |
|---|---|---|
| A | Cam Lock | 20 pcs |
| B | Screw M6x35 | 20 pcs |
| C | Dowel φ8x30 | 8 pcs |
| D | Screw φ3.5x14 | 40 pcs |
| E | Allen Wrench | 1 pc |
| F | Screw M6x25 | 4 pcs |
| G | Screw M6x25 | 4 pcs |
| H | Screw M6x25 | 12 pcs |
| I | Screw M6x25 | 4 pcs |
| J | Screw M5x38 | 4 pcs |
| K | Screw M5x38 | 4 pcs |
| L | Cam Lock | 1 pc |
| M | Screw M4x20 | 8 pcs |
| N | Screw M4x20 | 4 pcs |
| O | Screw M4x20 | 8 pcs |
| P | Screw M4x20 | 4 pcs |
| Q | Screw M4 | 4 pcs |
Assembly Steps
Step 1: Attach Legs
Attach the legs (7) to the bottom panel (5) using screws (F).
Step 2: Assemble Side Panels and Bottom Panel
Attach side panels (2, 3) to the bottom panel (5) using cam locks (A) and screws (B).
Step 3: Attach Back Panel
Slide the back panel (4) into the grooves of the side panels.
Step 4: Attach Top Panel
Attach the top panel (1) to the side panels using cam locks (A) and screws (B).
Step 5: Install Drawer Slides
Attach the drawer slide rails (13, 14) to the side panels using screws (D).
Step 6: Assemble Drawer Box
Assemble the drawer box using drawer sides, back, and front panels with screws (C) and cam locks (A).
Step 7: Install Drawer Slides on Drawer
Attach the corresponding drawer slide rails to the assembled drawer box using screws (D).
Step 8: Insert Drawer
Slide the assembled drawer into the cabinet.
Step 9: Attach Door Hinges
Attach the hinges (16) to the door panels (8) using screws (D).
Step 10: Mount Doors
Attach the doors to the cabinet frame using the hinges and screws (H).
Step 11: Adjust Doors
Adjust the doors using the screws on the hinges for proper alignment.
Step 12: Install Shelves
Insert the shelves (6) into the cabinet.
Step 13: Install Drawer Handle
Attach the drawer handle (15) to the drawer front using screws (J).
Step 14: Secure the Unit
Use the provided anti-tip kit (L) to secure the unit to the wall. Follow the specific instructions for wall mounting.
Final Check
Ensure all screws are tightened and the unit is stable. If there is any misalignment, adjust the screws as needed.
