Schneider Electric PrismaSeT LVS08964 Mounting System
Important Notes
Electrical equipment must be installed, operated, serviced, and maintained by qualified personnel only. Schneider Electric is not responsible for any consequences arising from the use of this material.
Safety Warnings
DANGER: HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Disconnect all power before servicing equipment.
- Always use a properly rated voltage sensing device to confirm that all power is off.
Failure to follow these instructions will result in death or serious injury.
Installation Guide
PrismaSeT P Installation
Diagram A shows the PrismaSeT P frame. Steps 1 and 2 illustrate attaching mounting brackets (part 1) to the frame using screws (part 2, quantity x2). Model numbers LVS08406, LVS08606, LVS08407, LVS08607 are associated with this system. Step 3 shows sliding a horizontal support bar into the frame.
PrismaSeT G Installation
Diagram A' shows the PrismaSeT G frame. Step 3 shows sliding a horizontal support bar into the frame.
PrismaSeT G IP55 Installation
Diagram A'' shows the PrismaSeT G IP55 frame. An information icon indicates a detail: a component needs to be rotated 180 degrees before installation. The main step shows sliding a horizontal support bar into the frame.
Component Assembly
Diagram B illustrates component assembly. Step 1 shows a component. Step 2 shows another component. Step 3 shows them being joined, with a detail indicating a sliding and locking mechanism. Step 4 shows the assembled unit.
Cabinet Mounting
Diagram C shows attaching a rail to a cabinet. Step 1 shows inserting a locking pin. Step 2 shows attaching the rail. Step 3 shows a detail of the locking mechanism engaging with an audible 'CLIC' sound indicator. Step 4 shows the successful installation, indicated by a happy face emoji .
Final Installation
Diagram D illustrates the final installation of a component into the PrismaSeT system for PrismaSeT P, G, and G IP55 variants. Step 1 shows inserting a locking element. Step 2 shows aligning the component. Step 3 indicates a quarter-turn action (1/4). Step 4 shows the secured component, indicated by an eye icon ?️ or '[verify installation]'. The system is compatible with conductors of 4 mm² and 6 mm².
Manufacturer Information
Schneider Electric Industries SAS
35, rue Joseph Monier
92500 Rueil-Malmaison
France
Website: www.se.com
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
Website: www.se.com/uk
This document has been printed on ecological paper.
© 2022 Schneider Electric - All rights reserved.
