PrismaSeT LVS03416 Installation Guide

Important Notes

PLEASE NOTE: Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. Schneider Electric assumes no responsibility for any consequences arising out of the use of this material.

REMARQUE IMPORTANTE: L'installation, l'utilisation, la réparation et la maintenance des équipements électriques doivent être assurées par du personnel qualifié uniquement. Schneider Electric décline toute responsabilité quant aux conséquences de l'utilisation de ce matériel.

TENGA EN CUENTA: La instalación, manejo, puesta en servicio y mantenimiento de equipos eléctricos deberán ser realizados sólo por personal cualificado. Schneider Electric no se hace responsable de ninguna de las consecuencias del uso de este material.

BITTE BEACHTEN: Elektrische Geräte dürfen nur von Fachpersonal installiert, betrieben, bedient und gewartet werden. Schneider Electric haftet nicht für Schäden, die durch die Verwendung dieses Materials entstehen.

NOTA: Manutenzione, riparazione, installazione e uso delle apparecchiature elettriche si devono affidare solo a personale qualificato. Schneider Electric non si assume alcuna responsabilità per qualsiasi conseguenza derivante dall'uso di questo materiale.

NOTA: A instalação, utilização e manutenção do equipamento elétrico devem ser efetuadas exclusivamente por pessoal qualificado. A Schneider Electric não assume qualquer responsabilidade pelas consequências resultantes da utilização deste material.

请注意: 电气设备的安装、操作、维修和维护工作仅限于合格人员执行。Schneider Electric 不承担由于使用本资料所引起的任何后果。

ОБРАТИТЕ ВНИМАНИЕ: Установка, эксплуатация, ремонт и обслуживание электрического оборудования может выполняться только квалифицированными электриками. Компания Schneider Electric не несет никакой ответственности за любые возможные последствия использования данной документации.

Assembly Instructions

Section A: Mounting the Bracket

This section details the mounting of a bracket using M6 x 16 screws. It involves securing the bracket to the vertical supports of a rack system.

• Step 1: Attach the bracket to the vertical support.
• Step 2: Secure the bracket using four M6 x 16 screws (x4).
• Step 3: Repeat for the other side.
• Step 4: Attach the LVS03416 component to the mounted bracket using screws (m=3).
• Step 5: Ensure the component is securely fastened.

Section B: Installing Components

This section shows the installation of components onto a mounting rail.

• Step 1: Slide the component onto the mounting rail.
• Step 2: Secure the component in place.
• Step 3: Repeat for additional components.

Diagram Description: The diagram shows two methods for attaching components. Method A illustrates attaching a bracket to a rack, followed by attaching a component to the bracket. Method B shows components being slid and secured onto a mounting rail.

Section C: Final Assembly

This section illustrates the final assembly steps, including securing the main unit and connecting components.

• Step 1: Mount the main unit onto the assembly.
• Step 2: Secure the unit with M4 x 2 screws (2 N.m torque).
• Step 3: Attach the side component.
• Step 4: Secure the side component with screws.
• Step 5: Final check of the assembly.

Diagram Description: The diagrams show the process of mounting the main unit and side components, with specific torque values indicated for screw fastenings (2 N.m and 9 N.m).

Section D: Electrical Connections

This section shows the installation of 3P and 4P components and their connection to the assembly.

• Step 1: Position the 3P and 4P components.
• Step 2: Secure the components using screws (2 N.m torque).
• Step 3: Connect the components to the assembly.
• Step 4: Final tightening of screws (9 N.m torque).

Diagram Description: The diagram illustrates the placement and securing of 3-pole (3P) and 4-pole (4P) electrical components, with torque specifications for fastening.

Product Information

Document Reference: GDE12362B-00

Publication Date: 09/2022

Manufacturer: Schneider Electric Industries SAS

Address: 35, rue Joseph Monier, 92500 Rueil-Malmaison, France

Website: www.se.com

This document has been printed on ecological paper.