Schneider Electric PrismaSeT LVS03122 Installation Guide
Document Reference: LVS03122
Safety Information
PLEASE NOTE: Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. (Similar notes are provided in French, Spanish, Italian, Portuguese, German, Chinese, and Russian).
Product Overview
This document provides installation instructions for Schneider Electric PrismaSeT enclosures and related components, specifically focusing on the FuPact ISFT 160 3P and FuPact ISFT 100N 3P modules. These modules are designed for electrical distribution systems and are compatible with cabinet heights of 600mm and 850mm.
The diagrams illustrate various configurations and assembly steps for these modules within the PrismaSeT system. Associated hardware includes M6 x 25 screws, M5 x 10 screws, and fasteners supplied in quantities of x2, x8, and x4.
Installation and Assembly Instructions
Section A: Module Preparation and Rail Mounting
This section details the initial steps for preparing and mounting the ISFT modules. It involves attaching mounting brackets to the modules using M6 x 25 screws and Ø8 screws (Step 1). The prepared modules are then attached to a rail system (Steps 2, 3, 4, 5, 6).
Section B: Support Structure Assembly
Assembly Step B describes the construction of a support frame or structure. This involves connecting horizontal bars using screws and washers, with a specified tightening torque of 4 N.m.
Section C: Module Mounting to Cabinet
Assembly Step C illustrates the process of mounting the assembled module system onto a cabinet structure. The assembly is secured to the cabinet using screws, requiring a tightening torque of 4.4 N.m (Step 1). Modules are then attached to the frame (Step 2).
Section D: Final Installation
Assembly Step D provides further installation details, including preparing modules (Step 1), attaching them to a rail (Steps 2, 3'), and finally mounting the complete assembly into a cabinet (Step 4).
Dimensional Data and Configurations
| Cabinet Height | Module Type | Dimension X (mm) | Dimension M (m) | Dimension H (mm) |
|---|---|---|---|---|
| 600mm | ISFT 160 | 75 | 5 | 150 |
| ISFT 100N | 100 | 5 | 150 | |
| 850mm | ISFT 160 | 75 | 5 | 150 |
Manufacturer Information
Manufacturer: Schneider Electric
Addresses:
- Schneider Electric Industries SAS, 35, rue Joseph Monier, 92500 Rueil-Malmaison, France.
- Schneider Electric Limited, Stafford Park 5, Telford, TF3 3BL, United Kingdom.
Websites: www.se.com, www.se.com/uk
This document has been printed on ecological paper.
© 2022 Schneider Electric. All rights reserved.
