Resistex Miks Luminaire: Installation Guide

Safety Instructions

• Never work on the luminaire when it is live (under voltage).
• Installation must be carried out by a professional installer, adhering to all relevant electrical installation standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD Norm). Handle the luminaire with necessary precautions.
• Follow the provided notes and steps for mounting.

Maintenance Instructions

• Avoid using chemical or abrasive products for cleaning the luminaire.
• Keep this installation manual for future dismantling or maintenance work.
• For additional information on RESISTEX luminaires, visit www.resistex-sa.com.
• RESISTEX is not liable for any misuse of the product.

Installation Procedure

The Resistex Miks luminaire offers options for adjustable orientation and low light output:

Adjustable Orientation

The luminaire can be adjusted to direct light. This involves inserting the fixture into the ceiling and then rotating a securing ring to set the desired angle.

[Diagram: Shows a fixture with a ring that can be rotated to adjust light direction.]

Low Light Output

The luminaire can be configured for low light output. The installation process includes attaching spring clips to the fixture before inserting it into the ceiling.

[Diagram: Shows a fixture with spring clips being attached, ready for ceiling mounting.]

Step-by-Step Mounting

1. Ceiling Preparation

   Cut a circular opening in the ceiling with a diameter of Ø69 mm (+/-1 mm).

   [Diagram: Shows a ceiling cutout template with dimensions Ø69 mm.]

2. Fixture Insertion

   Insert the Resistex Miks luminaire into the prepared ceiling opening.

   [Diagram: Shows the luminaire being placed into the ceiling hole.]

3. Securing the Luminaire

   The luminaire is held in place by integrated spring clips that engage with the ceiling material. The fixture may also involve rotating a ring to lock it.

   [Diagram: Shows the luminaire being pushed into the ceiling, with spring clips extending to grip the edge, or a ring being rotated to secure it.]

4. Electrical Wiring

   Connect the power supply wires to the luminaire's terminal block. Ensure correct connection to Live (L), Neutral (N), and Earth (if applicable).

   [Diagram: Close-up of the terminal block showing L, N, and Earth connection points. A separate diagram illustrates correct wiring polarity with ✔️ and incorrect wiring with ❌.]

5. Final Installation

   Confirm the luminaire is securely mounted and all electrical connections are properly made.

   [Diagram: Shows the fully installed Miks luminaire flush with the ceiling.]

Product Details & Compliance

Brand: Resistex

Model: Miks

Reference: MIKS_963267 (from external metadata)

Certifications: RoHS compliant, CE marked, IP65 rated, IK07 rated, Class II insulation.

Manufacturer: RESISTEX EXPLOITATION

Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche, France

Contact: Tél. 04 93 276 276 | Fax 04 93 276 280 | contact@resistex-sa.com

Website: www.resistex-sa.com