Resistex Miks Lighting Fixture

Product Overview

The Resistex Miks is a lighting fixture designed for various applications, offering adjustable and low-light options.

Model: Miks

Version: V1.1 - 09.22

Installation Instructions

Safety Notes:

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to electrical installation standards and regulations.
• Be aware of electrostatic discharge (ESD) risks. Handle with precautions.
• Follow all indications and mounting steps carefully.

Maintenance Instructions:

• Do not use chemical or abrasive products for cleaning the fixture.
• Keep these instructions for future dismantling or maintenance. Additional information is available on the Resistex website: www.resistex-sa.com.
• Resistex is not responsible for any misuse of the product.

Mounting / Installation Steps:

1. Step 1: Preparation

   Diagram showing dimensions for installation: A cut-out diameter of Ø69mm (+/-1mm) is required. The diagram also shows optional accessories.

2. Step 2: Fixture Insertion

   Diagram showing the main fixture body being inserted upwards into the prepared ceiling opening.

3. Step 3: Securing the Fixture

   Diagram illustrating the fixture being rotated clockwise to secure it within the ceiling opening.

4. Step 4: Electrical Connection Preparation

   Diagram showing the electrical cable connection point, highlighting a push-in connector for the power supply.

5. Step 5: Opening Connector Block

   Diagram showing the connector block being opened, typically by lifting a lever or tab, to allow wire insertion.

6. Step 6: Wire Insertion

   Diagram showing the live (L) and neutral (N) wires being inserted into the corresponding terminals within the connector block. The diagram labels the terminals as L, N, and possibly others.

7. Step 7: Closing Connector Block

   Diagram showing the connector block being closed to firmly secure the inserted wires.

8. Step 8: Final Fixture Placement

   Diagram illustrating the spring-loaded clips on the fixture being compressed to allow it to be pushed fully into the ceiling recess.

9. Step 9: Wiring Verification

   Diagram showing correct wiring with a green checkmark (✔️) indicating live to live and neutral to neutral connections. An incorrect wiring example is shown with a red cross (❌).

10. Step 10: Final Installation View

    Diagram showing the fully installed Miks lighting fixture flush with the ceiling surface. An "OFF" switch is depicted.

Company Information

Resistex Exploitation

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: 04 93 276 276 - Fax: 04 93 276 280 - Email: contact@resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477

Website: www.resistex-sa.com

Certifications and Compliance

The product complies with the following standards and certifications:

• ROHS Compliant
• Classe II (Class II Electrical Insulation)
• IP65 (Ingress Protection rating)
• IK07 (Impact Protection rating)
• CE Marked (Conformité Européenne)
• IRC (Indice de Rendu des Couleurs - Color Rendering Index)
• Other standards indicated as NORME (Norm)