Resistex Miks Luminaire

Options / Accessories

This luminaire offers two main options:

• Orientable / Adjustable: Allows for directional lighting.
• Basse Luminance / Low Light: Designed for reduced glare and softer illumination.

Safety Notes

• Never work on the luminaire when it is live (under voltage). ⚡
• Installation must be performed by a professional installer in compliance with current electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be found on the website: www.resistex-sa.com
• RESISTEX cannot be held responsible for any misuse of the product.

Montage / Installation Steps

1. Prepare Cutout: Create a ceiling cutout with a diameter of Ø69 mm (+/-1 mm). A template is provided for precise marking.
2. Insert Luminaire: Gently insert the luminaire into the prepared ceiling opening.
3. Secure Luminaire: Rotate the luminaire to engage its securing mechanism, ensuring it is firmly held in place.
4. Prepare Wiring: Open the electrical connector provided with the luminaire.
5. Connect Wires: Insert the mains supply wires into the appropriate terminals within the connector: Live (L), Neutral (N), and Earth (ground). Ensure correct polarity.
6. Close Connector: Securely close the electrical connector.
7. Final Installation: Push the luminaire into the ceiling opening. Spring clips will automatically engage to hold the luminaire firmly against the ceiling surface.
8. Wiring Check: Verify the wiring connections are correct and secure, as indicated by a green checkmark symbol (✔️) in the diagram. Incorrect connections are indicated by a red cross symbol (❌).
9. Final Appearance: The luminaire is now installed and flush with the ceiling.