Anker PowerCore Slim 10000 PD User Manual
Model: A1231
Product Type: External Battery / Portable Charger
Getting Started
This user manual provides instructions for the Anker PowerCore Slim 10000 PD portable charger.
Charging Your Devices
Charging Your Phone or Tablet
Connect your phone or tablet to the USB-C port of the PowerCore Slim 10000 PD using a USB-C cable.
[Diagram Description: Shows a USB-C port on the PowerCore Slim 10000 PD connected to a smartphone or tablet via a USB-C cable.]Charging Bluetooth Earphones or Smart Watches
For devices that require lower power output, such as smart watches or Bluetooth earphones, use the trickle-charging mode.
How to Use Trickle-Charging Mode:
- Press the power button twice, or press and hold it for 2 seconds. The LED indicator will turn green.
- Charge your recommended devices (e.g., smart watches, Bluetooth earphones).
- To exit trickle-charging mode, press the power button once more.
Recharging Your PowerCore
Recharge the PowerCore Slim 10000 PD using a PD (Power Delivery) charger. A PD charger is not included.
[Diagram Description: Shows a USB-C port on the PowerCore Slim 10000 PD connected to a PD charger via a USB-C cable.]Specifications
| Feature | Details |
|---|---|
| Cell Capacity | 10,000mAh / 37Wh |
| PD Input | 5V=3A, 9V=2A, 15V=1.2A |
| PD Output | 5V=3A, 9V=2A, 15V=1.2A |
| PIQ Output | 5V=2.4A |
| Total Output | 5V=3.6A |
| Size | 149.5 x 68.5 x 14.5 mm |
| Weight | 212 g |
Important Safety Instructions
- Store product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C and 30°C.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, recharge and discharge it once every three months.
- When charging a device, the product may feel warm; this is a normal operating condition and should not cause concern.
- In normal conditions, battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke; tape the terminals to insulate them.
Declarations and Compliance
EU Declaration of Conformity
Anker Innovations Limited declares that the product type A1231 complies with Directive 2014/30/EU, 2011/65/EU, and 2001/95/EC. The full text of the EU declaration of conformity is available at: https://www.anker.com
Authorized Representative in EU: Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany
GB Declaration of Conformity
Anker Innovations Limited declares that the product type A1231 complies with the Electromagnetic Compatibility Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at: https://www.anker.com
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Importer (US): Fantasia Trading LLC, 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US. Telephone: +1 (800) 988 7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
Recycling Information
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. ♻️
Customer Support and Warranty
Lifetime Technical Support
For technical support, please visit anker.com/support or contact:
- support@anker.com
- US/CA: +1 (800) 988 7973
- UK: +44 (0) 1604 936200
- DE: +49 (0) 69 9579 7960
- China: +86 400 0550 036
- Japan: 03 4455 7823
Customer Service
Contact customer service for any inquiries.
18-Month Limited Warranty
This limited warranty does not affect your statutory rights under applicable law governing the sale of consumer goods.
