Charge Your Phone or Tablet
Connect your phone or tablet to the Anker PowerCore Slim 10000 PD using the USB-A or USB-C ports to begin charging.
The device features a USB-A port and a USB-C port for charging.
Charge Your Bluetooth Earphones or Smart Watches
To charge devices like smart watches or Bluetooth earphones that require lower power, activate "trickle-charging" mode:
- Press the power button twice, or press and hold it for 2 seconds. The LED indicator will turn green.
- Charge your recommended devices.
To exit trickle-charging mode, press the power button once again.
Recharge Your PowerCore
Recharge your PowerCore Slim 10000 PD using a USB-C PD charger (charger not included).
Connect the USB-C PD charger to the USB-C port on the PowerCore.
Specifications
| Feature | Details |
|---|---|
| Capacity | 10,000mAh / 37Wh |
| PD Input | 5V 3A, 9V 2A, 15V 1.2A |
| PD Output | 5V 3A, 9V 2A, 15V 1.2A |
| PIQ Output | 5V 2.4A |
| Total Output | 5V 3.6A |
| Size | 149.5 x 68.5 x 14.5 mm |
| Weight | 212 g |
Important Safety Instructions
- Store the product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Using a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 45°C.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, recharge and discharge it once every three months.
- When charging a device, the product may feel warm; this is a normal operating condition and should not be a cause for concern.
- In normal conditions, battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke; tape the terminals to insulate them.
Declarations and Statements
Declaration of Conformity
Anker Innovations Limited declares that product type A1231 complies with Directives 2001/95/EC, 2014/30/EU, and 2011/65/EU. The full text of the EU declaration of conformity is available at: www.anker.com.
Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party: Fantasia Trading LLC, 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US. Telephone: +1 (800) 988 7973.
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Customer Service
Warranty: 18-month limited warranty.
Support: Lifetime technical support.
Contact Information:
- Email: support@anker.com
- US: +1 (800) 988 7973 (Mon-Fri 9:00am - 5:00pm PT)
- UK: +44 (0) 1604 936200 (Mon-Fri 6:00 - 11:00 GMT)
- DE: +49 (0) 69 9579 7960 (Mo-Fr 6:00 - 11:00)
- China: +86 4000550036 (周一至周五 9:00-17:30)
- Japan: +81 0344557823 (月-金 9:00-17:00)
