Anker PowerCore Slim 10000 PD User Manual

Product Overview

The Anker PowerCore Slim 10000 PD is a portable charger designed to provide high-speed charging for your devices. It features a 10,000mAh capacity and utilizes USB-C Power Delivery (PD) for fast charging input and output, alongside Anker's PowerIQ (PIQ) technology for optimized charging via the USB-A port.

Key Features:

• 10,000mAh high capacity battery.
• USB-C port supporting Power Delivery (PD) for rapid charging.
• USB-A port with PowerIQ (PIQ) for intelligent device charging.
• LED indicators to display the remaining battery level.

Note: Simultaneous charging of the PowerCore itself and a connected device is not supported.

Specifications

Charging and Usage

Charging the PowerCore: Connect a USB-C cable to the PowerCore's USB-C port and a compatible power adapter. The LED indicators will illuminate to show the charging status. When the PowerCore is fully charged, all LED indicators will turn off.

Charging Devices: Connect your device to either the USB-C or USB-A port using the appropriate charging cable. The PowerCore will automatically begin charging your device.

LED Indicator Guide: The LED lights indicate the approximate remaining battery level:

• Four lights illuminated: 100% charged
• Three lights illuminated: Approximately 50% charged
• Two lights illuminated: Approximately 25% charged
• One light illuminated: Low battery

Important Safety Instructions

When using this product, basic precautions should always be followed:

• Store the product in a cool and dry place.
• Do not store the product in hot or humid environments.
• Using a power supply or charger not recommended or sold by Anker may result in a risk of fire or injury.
• Operating temperature range: 0°C to 45°C (32°F to 113°F).
• Do not disassemble the product. Service or repair requires a qualified service person. Incorrect reassembly may lead to fire or injury.
• If the product is not used for extended periods, charge and discharge it once every three months to maintain battery health.
• The product may feel warm during device charging; this is a normal operating condition and not a cause for concern.
• Battery performance naturally declines over several years under normal usage.
• Do not dispose of the product in heat or fire.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping, or applying excessive force may cause product damage.
• When disposing of batteries, keep cells or batteries of different electrochemical systems separate from each other.
• Keep out of reach of children.

Prohibited Actions:

• Do not disassemble, open, crush, or puncture the portable charger with metal objects.
• Do not expose the portable charger to heat sources or flames, or dispose of it in fire. Avoid storage in direct sunlight.
• Do not short-circuit the portable charger. Avoid placing multiple portable chargers together in boxes or drawers to prevent accidental short circuits.
• Do not subject the portable charger to mechanical shock.
• If leakage occurs, avoid direct contact with skin or eyes. If contact occurs, wash the affected area with plenty of water.
• Always follow manufacturer's instructions for charging.
• Ensure correct usage by paying attention to markings on the portable charger.
• Keep the portable charger clean and dry.
• Do not leave the portable charger plugged in for charging indefinitely.
• Retain the original product manual for future reference.
• Dispose of used portable chargers according to national environmental regulations.

Support and Warranty

Customer Service:

• Email: support@anker.com
• USA: +1 (800) 988 7973 (Mon-Fri 9:00am - 5:00pm PT)
• UK: +44 (0) 1604 936200 (Mon-Fri 6:00 - 11:00 GMT)
• Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00 - 11:00 CET)
• Japan: +81 03 4455 7823 (Mon-Fri 9:00 - 17:00 JST)
• China: +86 4000550036 (Mon-Fri 9:00 - 17:30 CST)

Warranty: Anker provides an 18-month limited warranty. This warranty does not affect your statutory consumer rights.

Technical Support: Lifetime technical support is available.

More Information: For frequently asked questions (FAQs) and additional details, please visit anker.com/support.

Compliance Information

Recycling: This product is subject to special collection for electrical and electronic equipment and should not be disposed of as household waste. Look for applicable collection points.

Declaration of Conformity: Anker Innovations Limited hereby declares that the product type A1231 complies with Directive 2014/30/EU. The full text of the EU declaration of conformity is accessible at: https://www.anker.com.

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized changes or modifications may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes radio or television reception interference, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Consulting the dealer or an experienced radio/TV technician.

Importer: Fantasia Trading LLC, 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US. Contact: +1 (909) 484 1530.

IC Statement: This device complies with Industry Canada license ICES-003. Operation is subject to two conditions: (1) this device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.