Anker PowerCore Slim 10000 PD User Manual
Model: A1231
Charging Your Devices
Charge Your Phone or Tablet
Connect your phone or tablet to the USB-A or USB-C port on the PowerCore using your device's charging cable.
[Diagram showing USB-A and USB-C ports on the PowerCore]
Charge Your Bluetooth Earphones or Smart Watches
For devices requiring lower power, such as smartwatches or Bluetooth earphones, use the trickle-charging mode.
Trickle-Charging Mode
- To Enter: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
- To Exit: Press the power button once again.
[Diagram illustrating the trickle-charging mode activation and LED indicator]
Recharge Your PowerCore
To recharge the PowerCore itself, connect it to a Power Delivery (PD) charger using a USB-C to USB-C cable.
Note: A PD charger is not included with this product.
[Diagram showing a USB-C cable connecting the PowerCore to a PD charger]
Specifications
| Feature | Specification |
|---|---|
| Cell Capacity | 10,000mAh / 37Wh |
| PD Input | 5V 3A, 9V 2A, 15V 1.2A |
| PD Output | 5V 3A, 9V 2A, 15V 1.2A |
| PIQ Output | 5V 2.4A |
| Total Output | 5V 3.6A |
| Size | 149.5 x 68.5 x 14.5 mm |
| Weight | 212 g |
Important Safety Instructions
- Store the product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 30°C.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge it once every three months.
- When charging a device, the product may feel warm; this is a normal operating condition and should not be cause for concern.
- In normal conditions, battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke; tape the terminals to insulate them.
Compliance and Declarations
Declaration of Conformity:
Anker Innovations Limited declares that the product type A1231 is in compliance with Directive 2014/30/EU & 2011/65/EU & 2001/95/EC. The full text of the EU declaration of conformity is available at: https://www.anker.com
GB Declaration of Conformity:
Anker Innovations Limited declares that the product type A1231 is in compliance with Electromagnetic Compatibility Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at: https://www.anker.com
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Statement:
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
[Recycling Symbol Description]: This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Support and Warranty
Customer Service:
- Email: support@anker.com
- Phone (US): +1 (800) 988 7973 (Mon-Fri 9:00am - 5:00pm PT)
- Phone (UK): +44 (0) 1604 936200 (Mon-Fri 6:00 - 11:00 GMT)
- Phone (DE): +49 (0) 69 9579 7960 (Mo-Fr 6:00 - 11:00)
- Phone (CN): +86 4000550036 (周一至周五 9:00 - 17:30)
- Phone (JP): +81 03 4455 7823 (月-金 9:00 - 17:00)
Warranty: 18-month limited warranty.
Lifetime Technical Support is available.
Note: Your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
