MUSKAN Shelving Unit Assembly Instructions

Safety Warning

⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Tools and Parts

Tools required: ?️ Phillips screwdriver, ✏️ Pencil, ? Spirit level.

Parts List

Part ID	Quantity	Description
110727	12x	Screw
118331	8x	Connector Dowel
120076	8x	Cam Lock Nut
101350	8x	Dowel
101345	44x	Dowel
107862	4x	Bolt
128481	1x	Wall Bracket
100006	1x	Allen Key

Diagram showing required tools: a Phillips screwdriver, a flathead screwdriver, a pencil, and a spirit level.

Diagram showing assembly on a carpeted floor is acceptable, but assembly on a surface with sharp edges is not recommended (indicated by a cross mark ❌).

Diagram showing a person looking confused at parts, followed by a person on the phone with the IKEA logo, suggesting to contact IKEA for assistance if unsure.

Diagram showing the assembled unit with a warning triangle ⚠️ and a circle indicating the top, followed by a diagram of the unit tipping over (indicated by a cross mark ❌), emphasizing the need for wall attachment.

Assembly Steps

Step 1

Attach connector dowels (118331) to the two side frames. A close-up shows a connector dowel being inserted into a pre-drilled hole on the side frame. Screws are also shown, implying they will be used to connect these frames later.

Diagram showing two side frames and a close-up of part 118331 being inserted, along with screws.

Step 2

Prepare two horizontal frame pieces. Insert dowels (101345) into the designated holes. Note: Dowel 101350 is not used in this step (indicated by a cross mark ❌ over 101350 in the comparison box).

Diagram showing two horizontal frame pieces with dowels (101345) being inserted. A comparison box shows 101345 and 101350, with 101350 crossed out.

Step 3

Prepare four more horizontal frame pieces. Insert dowels (101345) into the designated holes. A close-up shows six dowels (101345) being inserted into a frame piece.

Diagram showing four horizontal frame pieces with dowels (101345) being inserted. A close-up shows six dowels (101345) being inserted.

Step 4

Insert cam lock nuts (120076) into the corresponding holes on the frame structure. A close-up shows cam lock nuts being inserted, ready to receive screws/bolts.

Diagram showing the frame structure and a close-up of cam lock nuts (120076) being inserted.

Step 5

Secure the frame structure using bolts (107862). A close-up shows bolts (107862) being screwed into place.

Diagram showing the frame structure and a close-up of bolts (107862) being fastened.

Step 6

Prepare the slatted shelves. Insert dowels (101350) into the shelves. Note: Dowel 101345 is not used in this step (indicated by a cross mark ❌ over 101345 in the comparison box).

Diagram showing two sets of slatted shelves (2x and 3x). A close-up shows dowels (101350) being inserted into the shelves. A comparison box shows 101345 and 101350, with 101345 crossed out.

Step 7

Attach the two side panels (with vertical slats) to the main frame. Arrows indicate the direction of insertion.

Diagram showing the main frame and the two side panels being inserted into it, with directional arrows.

Step 8

Insert the three slatted shelves into the assembled frame. A close-up shows dowels (101345) being inserted into the shelves.

Diagram showing the partially assembled unit and the three slatted shelves being inserted. A close-up shows dowels (101345) being inserted.

Step 9

Secure the side panels to the frame using screws (110727) and the Allen key (100006). A close-up shows a screw being driven into place.

Diagram showing the unit and a close-up of screws (110727) being used with the Allen key (100006) to attach the side panels.

Step 10

Continue securing the structure by driving screws (110727) into place using the Allen key (100006). A close-up shows a screw being fastened.

Diagram showing the unit and a close-up of screws (110727) being used with the Allen key (100006) to secure the structure.

Step 11

Place the assembled shelving unit in its desired location. A warning triangle ⚠️ is shown, indicating the importance of wall attachment. A close-up shows a pencil marking a spot on the wall for the wall bracket.

Diagram showing the fully assembled unit standing upright, with a warning triangle ⚠️. A close-up shows a pencil marking a wall for attachment.

Step 12

Attach the wall bracket (128481) to the wall. Use appropriate screws and plugs for your wall type (not included). A close-up shows the wall bracket being secured to the wall.

Diagram showing the wall attachment process. A close-up shows the wall bracket (128481) being attached to the wall with a screw and plug.

Step 13

Secure the shelving unit to the wall bracket. A close-up shows the unit being fastened to the wall bracket with a screw.

Diagram showing the shelving unit attached to the wall via the wall bracket, with a close-up of the final securing screw.

	MUSKAN Shelving Unit Assembly Instructions \| IKEA Comprehensive assembly guide for the IKEA MUSKAN shelving unit, including essential safety warnings about furniture tip-over and step-by-step instructions for building and installing the unit securely.
	MUSKAN Bookshelf Assembly Instructions and Safety Guide Detailed assembly instructions and safety warnings for the IKEA MUSKAN bookshelf. Learn how to safely assemble and secure your MUSKAN unit to prevent tipping hazards.
	MUSKAN Shelving Unit Assembly Instructions \| IKEA Step-by-step assembly guide for the IKEA MUSKAN shelving unit. Includes safety warnings, parts list, and detailed instructions for building and securing your furniture.
	IKEA IVAR Box Shelf with Divider Assembly Instructions Detailed assembly instructions for the IKEA IVAR box shelf with divider, including a parts list, step-by-step guidance, and visual descriptions of the assembly process.
	IKEA IVAR Shelf Unit Assembly Instructions Detailed assembly guide for the IKEA IVAR shelf unit, covering parts, tools, and step-by-step construction for the box and its mounting into a larger shelving system.
	IKEA ALEX Drawer Unit Assembly Instructions A comprehensive guide detailing the step-by-step assembly process for the IKEA ALEX drawer unit, including a parts list and clear instructions for building the furniture.
	IKEA ALEX Drawer Unit Assembly Instructions Step-by-step guide for assembling the IKEA ALEX drawer unit, including parts list and detailed assembly steps.
	IKEA ALEX Drawer Unit Assembly Instructions Step-by-step guide for assembling the IKEA ALEX drawer unit, detailing each stage with textual descriptions of diagrams, parts, and hardware. Includes a comprehensive parts list and general assembly advice.