MUSKAN Shelving Unit
Assembly Instructions
Important Safety Information
⚠️ WARNING: Furniture tip-over can cause serious injury or death.
To reduce the risk of furniture tip-over, follow these essential safety precautions:
- ALWAYS install the provided anti-tip device.
- NEVER place a TV or other heavy objects on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place the heaviest items in the lowest drawers.
(This warning is provided in multiple languages in the original document.)
Parts Included
Ensure all parts are present before assembly. Part numbers are for reference.
- Long screws (110727): 12x
- Dowels (118331): 8x
- Cam lock nuts (120076): 8x
- Cam lock screws (101350): 8x
- Wooden dowels (101345): 44x
- Feet (107862): 4x
- Anti-tip strap kit (128481): 1x
- Allen key (100006): 1x
Assembly Steps
Step 1: Prepare Base
Lay out the two long base rails. Insert 4x wooden dowels (118331) into one base rail.
Step 2: Attach Vertical Side Panels (Part 1)
Take two vertical side panels. Insert wooden dowels (101345) into the top and bottom ends of these panels. Attach these side panels to the base rail from Step 1 using 4x cam lock screws (101350) and 4x cam lock nuts (120076).
Step 3: Attach Vertical Side Panels (Part 2)
Take the other two vertical side panels. Insert wooden dowels (101345) into the top and bottom ends of these panels. Attach these side panels to the second base rail using 4x cam lock screws (101350) and 4x cam lock nuts (120076). Connect the two assembled halves using 6x wooden dowels (101345).
Step 4: Prepare for Shelves
Insert 4x cam lock nuts (120076) into the designated holes on the inner sides of the vertical frame structure, where the shelves will be placed.
Step 5: Attach Feet
Screw the 4x feet (107862) into the bottom of the assembled unit.
Step 6: Install Lower Shelves
Place 3x slatted shelves into the lower section of the unit. Secure them using 8x cam lock screws (101350) and the corresponding cam lock nuts.
Step 7: Insert Vertical Dividers
Insert the vertical divider panels into their designated slots within the frame.
Step 8: Install Upper Shelves
Place the remaining 3x slatted shelves into the upper section of the unit. Secure them using wooden dowels (101345).
Step 9: Secure Shelves (Part 1)
Secure the shelves from the outside of the vertical supports using 6x long screws (110727) and the Allen key (100006).
Step 10: Secure Shelves (Part 2)
Secure the shelves further using another 6x long screws (110727) and the Allen key (100006).
Step 11: Final Check
Ensure all parts are securely fastened and the unit is stable.
Anti-Tip Device Installation
For safety, it is crucial to secure the unit to the wall using the provided anti-tip device (128481).
Instructions:
- Attach one end of the strap to the back of the unit using the provided screw.
- Position the unit against the wall.
- Mark the wall through the other end of the strap.
- Drill a hole in the wall at the marked spot (use appropriate wall anchors if necessary, not always included).
- Secure the other end of the strap to the wall using the provided screw and wall anchor.
- Ensure the strap is taut but does not pull the unit away from the wall.
(Visuals show the strap being attached to the unit and then to the wall.)
