⚠️ Safety Warnings
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the provided anti-tip device.
- NEVER place a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Parts List
- 110727: 12x
- 118331: 8x
- 120076: 8x
- 101350: 8x
- 101345: 44x
- 107862: 4x
- 128481: 1x (Anti-tip bracket)
- 100006: 1x (Allen key)
Tools required: Screwdriver (Phillips and flathead), pencil, spirit level. ?️
Assembly may require two people. Check all parts are present before assembly. If any parts are missing or damaged, contact IKEA.
Assembly Instructions
Step 1: Prepare Side Panels
Take the two long side panels. Insert 4x connector bolts (118331) into the pre-drilled holes on each side panel. Ensure they are fully seated.
Diagram shows: Two long side panels, with 4x 118331 being inserted into each.
Step 2: Insert Dowels into Side Panels
Insert 4x wooden dowels (101345) into the designated holes on the inner side of each long side panel. Do not use part 101350 for this step (indicated by ❌).
Diagram shows: Side panel with 4x 101345 dowels being inserted. A separate image shows 101345 (correct) and 101350 (incorrect, with a cross).
Step 3: Insert Dowels into Crossbars
Insert 6x wooden dowels (101345) into the ends of the crossbars.
Diagram shows: Several crossbars with 101345 dowels inserted into their ends.
Step 4: Attach Cam Locks
Insert 4x cam locks (120076) into the designated holes on the shelf support pieces.
Diagram shows: Shelf support pieces with 4x 120076 cam locks being inserted.
Step 5: Attach Bottom Screws
Attach 2x screws (107862) to the bottom frame pieces.
Diagram shows: Bottom frame pieces with 2x 107862 screws being attached.
Step 6: Prepare Shelves
Insert 8x wooden dowels (101350) into the ends of the shelves. Note: The diagram indicates 8 dowels are used for the shelves. Do not use part 101345 for this step (indicated by ❌).
Diagram shows: Several shelves with 101350 dowels inserted into their ends. A separate image shows 101345 (incorrect, with a cross) and 101350 (correct).
Step 7: Attach Uprights to Base
Slide the upright frame sections into place on the base frame. Arrows indicate the direction of insertion.
Diagram shows: Upright sections being slid into the base frame.
Step 8: Insert Shelf Dowels into Uprights
Insert 12x wooden dowels (101345) into the pre-drilled holes on the uprights where the shelves will be placed.
Diagram shows: Upright frame sections with 12x 101345 dowels being inserted.
Step 9: Secure Uprights to Base
Secure the uprights to the base frame using 6x screws (110727) and the Allen key (100006).
Diagram shows: Uprights being attached to the base with screws and Allen key.
Step 10: Continue Assembly
Continue attaching the remaining upright sections and shelves. Secure with 6x screws (110727).
Diagram shows: Further assembly of uprights and shelves, with screws being inserted.
Step 11: Final Assembly Check & Wall Mounting Preparation
Ensure the shelving unit is fully assembled and stable. ⚠️ It is crucial to secure the unit to the wall to prevent tipover. A warning symbol indicates the importance of wall anchoring.
Diagram shows: The fully assembled shelving unit. A warning symbol and circle highlight the need for wall mounting.
Step 12: Secure Unit to Wall
Attach the anti-tip bracket (128481) to the wall and the top of the shelving unit using the provided hardware. Follow specific instructions for wall type if necessary (e.g., using appropriate wall anchors, not included).
Diagram shows: Close-up of the anti-tip bracket being attached to the unit and the wall.
