MAULjuvis 825 87 LED Luminaire

Brand: MAUL

Product Overview and Components

This document provides assembly and service instructions for the MAULjuvis 825 87 LED luminaire.

Key Article Numbers:

MAULjuvis 825 87 Luminaire Assembly
Art.-No.: 8258309.210 (EOKE Dimmable Constant Current LED Driver)
Art.-No.: 8258609.220 (Control Board)
Art.-No.: 8258609.225 (Small PCB)
Art.-No.: 8258309.205 (LED Module)
Art.-No.: 8258309.200 (LED Module) - Used in sets of 2

Component Details: EOKE LED Driver

Model: BK-CJL080-2000AM

Type: Dimmable Constant Current LED Driver

Input: 200-240V~ 50/60Hz 0.5A Max. Power Factor (λ): 0.95

Output: 50V Max. 80W Max.

Thermal Specifications: tc: 90°C, ta: 60°C

Certifications: SAA, CE, SELV, RoHS

Origin: Made in China

Assembly and Disassembly Instructions

The following steps outline the process for accessing and replacing components such as the LED modules and the LED driver. A PH2 screwdriver is required for most operations.

Step 1: Accessing Internal Components

Turn the luminaire upside down to access the rear panel. Identify and remove the screws securing the rear cover. The diagrams indicate specific screw locations for removal.

Required tool: ? PH2 screwdriver.

Visual Description: The underside of the luminaire is shown. Several screws are visible. In some steps, specific screws are circled in red, indicating they need to be removed.

Step 2: Removing the LED Driver

After removing the cover, locate the LED driver (Art.-No.: 8258309.210). Disconnect the power and output connectors. The diagrams show connectors labeled for disconnection.

Connector Handling:
"ZIEHEN PULL b)" indicates to pull a connector (e.g., power input, output to LED modules).
"DRÜCKEN PUSH a)" indicates to push a release mechanism on a connector to detach it.

Visual Description: The internal components are visible, including the LED driver and wiring. Connectors are shown with labels indicating how to disconnect them.

Step 3: Removing LED Modules

Locate the LED modules (Art.-No.: 8258309.205 and 8258309.200). These are typically secured by screws.

Identify the screws holding the LED module in place.
Use the ? PH2 screwdriver to remove these screws.
Carefully detach the LED module.

Visual Description: The LED modules are shown mounted within the luminaire housing. Screws securing the modules are highlighted. The process of pulling out an LED module is depicted.

Step 4: Replacing Components

To replace a component, follow the disassembly steps in reverse. Ensure all connections are secure and all screws are properly tightened.

Install the new LED module or driver.
Reconnect all wiring harnesses to their respective ports.
Secure the component with the appropriate screws.
Reattach the luminaire cover and fasten it with screws.

Visual Description: Diagrams show the sequence of operations, such as pulling connectors or removing screws, to facilitate component replacement.

Step 5: Final Assembly Check

Ensure all parts are correctly reassembled and secured. The luminaire is now ready for installation or continued use.

	MAULjuvis 825 86 LED Lamp Assembly and Maintenance Guide Detailed instructions for assembly, disassembly, and maintenance of the MAULjuvis 825 86 LED lamp, covering component identification, removal, and reassembly procedures.
	MAULjuvis 825 87 LED Desk Lamp - Assembly and Operation Manual Detailed instructions for assembling, operating, and calibrating the MAULjuvis 825 87 LED desk lamp. Includes information on its motion and daylight sensors, dimming features, technical specifications, and spare parts.
	MAULjaval 825 83 LED Lamp Service and Parts Replacement Guide Detailed instructions for servicing and replacing components of the MAULjaval 825 83 dimmable LED floor lamp, including LED modules and drivers.
	MAULjuvis 825 87 LED Floor Lamp: Assembly, Operation, and Sensor Guide This guide provides detailed instructions for assembling and operating the MAULjuvis 825 87 LED floor lamp. Learn about its motion and daylight sensor features, dimming capabilities, and spare parts. Includes technical specifications and energy efficiency information.
	MAULjaval 825 84 LED Floor Lamp: Maintenance and Replacement Guide Detailed instructions for maintaining and replacing the LED module and driver of the MAULjaval 825 84 LED floor lamp. Includes part numbers, specifications, and step-by-step guidance.
	MAULjuvis 825 86 LED Floor Lamp Assembly and Operation Guide Detailed assembly instructions and operational guide for the MAULjuvis 825 86 LED floor lamp, featuring motion and daylight sensors. Learn how to assemble, set up, and use the lamp's advanced features.
	MAULjaval LED Floor Lamp Assembly and Operation Guide Comprehensive guide for assembling and operating the MAULjaval LED floor lamp (Model 825 84). Includes parts list, step-by-step instructions, and product specifications.
	MAULjaval 825 83 LED Floor Lamp - Assembly and Operation Guide Comprehensive guide for assembling and operating the MAULjaval 825 83 dimmable LED floor lamp. Includes specifications, step-by-step assembly instructions, operation details, and spare parts information.