Timex IQ+ Move Multi-Time User Guide

Timex IQ+ Move Multi-Time Features

The Timex IQ+ Move Multi-Time timepiece combines the beauty of a classic analog watch with the ability to track multiple metrics including steps, distance, calories, and sleep.

• Classic Analog Design
• Bluetooth Low Energy (BLE) connection with smartphone app (iOS and Android OS)
• Multiple time zones displayed
• Activity tracking displayed on watch dial in both steps and distance
• Sleep tracking measures time slept and level of sleep displayed on smartphone app
• Alarm and countdown timer controlled by smartphone app
• Smartphone app retains activity and sleep data and displays it by day, week, month or year
• INDIGLO night-light
• Estimated battery life of 1 year

Minimum Requirements

This watch requires a compatible iOS or Android smartphone, and the Timex Connected smartphone app.

Go to http://www.timex.com/getstarted and download the Timex Connected mobile app to your smartphone.

Overview

The watch face features an hour hand, a minute hand, and a second hand which also functions as a Perfect Date® indicator. A sub-dial displays the 2nd time zone.

How to Set Up Your Watch

NOTE: Pairing your watch and smartphone is performed during the on-boarding steps below. Do not attempt to pair devices from the smartphone's manual Bluetooth settings.

1. Download the Timex Connected app to your smartphone.
2. Make sure Bluetooth function is turned ON in your smartphone settings.
3. On your watch press and release the crown into the closed (pushed in) position.
4. On your smartphone, with your watch near your phone, follow the instructions in the app:
1. Open the Timex Connected app on your smartphone.
2. Accept the user agreement.
3. Select the iQ+ Move Multi-Time watch.
4. For Android only: give permission and accept device location.
5. Answer user profile questions to set up time zones, activity tracking and set goals.
6. When prompted, press and hold the crown for 5 seconds, until a melody plays and all hands move to ~12 o'clock. Bluetooth function is now turned on.
7. From the list, select the "iQ Move Multi-Time xxxxxx" watch.
8. If a watch update is available, it will install automatically.
9. Follow app instructions to calibrate watch hands.

After completing these steps, your watch is synced with your smartphone and set to the phone time, with its activity and sleep tracking functions ready to use.

Changing the Time

The time displayed on your watch is updated from your phone upon successful initial completion of the setup steps listed above. Every time the watch and smartphone app are synced, the time will be updated.

To manually override the time on your watch, gently pull out crown to outer position. The subdial hand will point UP, indicating you will be changing the time in the Primary Time Zone (i.e., the time that shows normally on the main dial). Rotate crown to set the time.

Pushing Button 2 will cause the subdial hand to point DOWN, indicating you can change the 2nd Time Zone time. Rotate crown to set the time.

Then push the crown to the closed position to finish changing the time.

Following a sync, the times displayed on the watch main dial and the subdial will return to showing the phone time on the main dial, and the 2nd Time Zone on the subdial, as set by the phone app.

Watch Crown Positions

The watch crown has four positions.

One is the temporary push position. Push briefly to activate the INDIGLO night-light and show the Perfect Date feature. Push longer than 5 seconds to activate Bluetooth function.

The other three are closed, middle and outer. Observe how the watch hands change as you move the crown: First extend the crown to its outer position, and then push the crown very lightly until you feel it click into the middle position, before pushing it to closed.

Activating the INDIGLO Night-Light

Press and hold the crown to activate the INDIGLO night-light. The light will stay on for 2-3 seconds after the crown is released. Pressing the crown for longer than 5 seconds will activate sync mode and hands will move to the 12 o'clock positions.

Watch Buttons

The watch has two buttons.

Button 1 at 2H

Temporarily switches time displayed on the sub-dial to the main dial and switches the main dial time to the sub-dial. Second hand displays perfect date of the 2nd time zone.

Button 2 at 4H

The second hand temporarily displays total steps or total distance, as set in the app.

Pressing and holding both buttons simultaneously for more than 10 seconds will sound a melody to indicate you have put the watch into Airplane Mode. In this state, the watch will not try to activate Bluetooth automatically.

To cancel Airplane Mode, either depress and hold both buttons for 10 seconds until a melody sounds, or depress and hold the crown to activate Bluetooth.

Synchronizing Watch and Smartphone

Synchronization, or sync, does the following:

• Transfers the previous 7 calendar days' worth of activity and sleep tracking data from your watch to your phone.
• Updates the watch time to match the smartphone time.
• Sends other app settings, such as alarm, 2nd Time Zone to display, etc. to watch.
• Sends other watch information, such as low battery, to smartphone.
• Does not delete activity data, either during or after synchronization.
• Checks for watch updates, and updates automatically.

NOTE: To prevent data loss, synchronize the watch to the smartphone app, a minimum of every six days.

NOTE: The watch must be within 2 meters (6.5 feet) distance of your smartphone for optimal communication.

To synchronize the watch and the smartphone:

1. Open the Timex Connected app on your smartphone.
2. On your watch, push and hold the crown for 5 seconds until a melody sounds and the hands move to 12 o'clock position.
3. Immediately tap the sync icon (a circular arrow icon) on the lower right on the app.
4. Listen for the melody that indicates the watch has completed Bluetooth synchronization with the smartphone app.

NOTE: If the Bluetooth connection between the smartphone app and the watch is disrupted, re-pair the watch and smartphone as follows:

1. Tell your smartphone to "forget" the watch:
1. In your smartphone's settings (not the Timex app), view Bluetooth devices.
2. Have your smartphone un-pair ("forget" or disconnect) your iQ+ Move MULTI-TIME watch.
3. Exit the Bluetooth settings.
4. Open the Timex Connected app and sync watch and smartphone.

Showing Seconds, Date, Distance, Steps

By default, the second hand shows seconds as on any analog watch.

When the second hand is set to show seconds, pressing the crown temporarily causes the second hand to point to the current day of the month; for example, at 23 seconds past the minute, pressing the crown would cause the second hand to point to 10 on the tenth day of the month.

You can set the second hand to show, instead of seconds, the number of steps, distance, day of the month, or 3rd Time Zone in 24 Hour Format. These settings are in the smartphone app.

Alarm

Set and turn on daily alarm on smartphone app. Sync to send alarm setting to watch. When alarm sounds, night-light flashes on watch. Press crown to silence, if crown is not pressed, alarm will sound for 20 seconds.

Countdown Timer

Set and start Countdown Timer on smartphone app. Sync to send to watch. Watch beeps and night-light flashes when countdown ends. Press crown to silence, if crown is not pressed, alert will sound for 20 seconds.

Adjusting Stride Length

The Timex iQ+ Move Multi-Time uses an algorithm for distance measurement which automatically determines your stride based on your height and speed. If you find the distance reported does not match your actual walking or running distance, you can calibrate the distance by up to +/- 25% via the smartphone app. You can do this through the distance-adjustment option on the watch section of the app.

Low Battery Power

The watch indicates when you need to replace the battery:

• During synchronization of the watch with the smartphone, the app will alert you if the battery needs to be replaced soon.
• The watch second hand will begin to move every 2 seconds in 2-second increments until the battery is replaced.

When battery power is low:

• To conserve power, the INDIGLO night-light will not function until the battery has been replaced.
• The watch and smartphone will not communicate.

The activity tracking functions will remain functional until the battery has been completely depleted, but new data will not be stored.

Replacing the Battery

Before replacing the battery, it is recommended that you synchronize to the smartphone app to ensure you have retrieved all of the latest activity and sleep data from the watch. After the battery is replaced, the watch will need to be re-calibrated with the smartphone.

Storing the Watch

You may remove power from the watch for storage. To do this, pull the crown out to the outer position. With the crown in this position, the hour, minute and second hands will stop immediately, and the activity- and sleep-tracking functions will be inactive after 30 minutes.

Smartphone App Updates

As smartphone app updates become available, you will be notified on your smartphone, the same way you learn of updates to other smartphone apps. Update this app using the same process you would to update any other app. Specific process varies by smartphone.

Watch Updates

As watch updates become available, you will be notified in the Timex Connected smartphone app. Follow the instructions in the app.

NOTE: Because the update will delete all activity recorded for the current day, performing the update early in the day will minimize the loss of recorded activity.

To ensure an uninterrupted connection during the update, place the watch and smartphone on a flat surface, beside each other, and avoid moving them until the update completes. During the update, the lower subdial hand shows progress, from 0 to 100%.

The duration of the update varies, averaging 5 to 10 minutes, but sometimes lasting up to 30 minutes.

Water Resistance

WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

NOTE: To confirm that your watch is water resistant, check for the water resistance symbol (a circle with a wavy line symbol) before immersing in water.

Your iQ+ Move Multi-Time watch is water resistant to a depth of 50 meters (164 feet).

• The watch is water resistant only as long as lens, push buttons and case remain intact.
• The watch is not a diver watch and should not be used for diving.
• Rinse the watch with fresh water after exposure to salt water.

* pounds per square inch absolute

Timex International Warranty

For warranty information, visit http://www.timex.com/productWarranty.html.

FCC Notice (U.S.) / IC Notice (Canada)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.

Caution: Any user changes/modifications to this device could void the user's authority to operate this device.

Declaration of Conformity

Manufacturer's Name: Timex Group USA, Inc.

Manufacturer's Address: 555 Christian Road, Middlebury, CT 06762, United States of America

declares that the product:

Product Name: Timex iQ+ Move Multi-Time

Model Numbers: M328

is in conformity with the relevant EU harmonized legislations. This declaration is issued under the sole responsibility of the manufacturer and conforms to the following:

R&TTE: 1999/05/EC - RED Directive 2014/53/EU Standards:

• CENELEC EN 61000-4-2: 2009
• CENELEC EN 61000-4-3: 2006+A2:2010
• CENELEC EN 55032: 2015/AC:2016-07
• ETSI EN 300 440-1: V2.1.1 (2017-03)
• ETSI EN 301 489-1: V1.9.2
• ETSI EN 301 489-17: V2.2.1

LVD: 2006/95/EC - 2014/35/EU Standards:

• IEC 60950-1: 2005+A1:A2
• CSA C22.2 #60950-1: 2007+A1:A2
• CENELEC EN 60950-1: 2007:R10

Electromagnetic Compatibility (EMC) - Radio Frequency (RF) Standards:

• FCC 47CFR 15, Subpart C
• IC RSS 102; Issue 4
• IC RSS 210; Issue 89
• IC RSS GEN Issue 4
• AS/NZS 4268: 2017

Agent: Sam Everett, Quality Regulatory Engineer

Date: 1 Aug 2017, Middlebury, Connecticut, U.S.A.

©2017 Timex Group USA, Inc. TIMEX, INDIGLO, PERFECT DATE and iQ+ are registered trademarks of Timex Group B.V. and its subsidiaries in the US and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Timex is under license. IOS is a trademark or registered trademark of Cisco in the US and other countries and is used under license. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.