Baby Trend Nursery Center Instruction Manual

Parts List

Item #: PY87983

• 1 Playard (fully assemble)
• 1 Mattress
• 1 Bassinet
• 4 Metal Support Tubes (2 male, 2 female)
• 1 Changing table
• 2 Long Curved Bar
• 2 Short Bar with Connector Knob
• 1 Music Center
• 1 Travel / Storage Bag
• 0 Parent Organizer
• 0 Toy Animal
• 0 Wind Up Mobile
• 1 Soft Goods
• 1 Strap Set
• 1 Side Basket
• 2 Lower Bar
• 2 Mattress Support Bar
• 2 Upper Frame
• 2 Side Frame
• 1 Center Cross Bar
• 1 Upper Back Bar
• 4 Leg / Pata / Pied
• 4 Screw / Tornillo / Vis

Safety Warnings

WARNING: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN.

Infant may roll into space between pad and loose mesh side causing suffocation.

WARNING: INFANTS CAN SUFFOCATE:

• In gaps between a mattress too small or too thick and product sides
• On soft bedding

Never add a mattress, pillow, comforter, or padding. Use only the mattress provided by manufacturer. Never use a water mattress with this product.

See playard floor and side rails for warning.

WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.

• The playard, including side rails, must be fully erected prior to use. Make sure latches are secure.
• Strings can cause strangulation! NEVER place items with a string around a child's neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.
• Discontinue use of the product when child is able to climb out or has reached the height of 35 in. (890 mm) or weight of 30 lbs. (14 kgs), whichever comes first.
• When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
• NEVER place product near a window where cords from blinds or drapes can strangle a child.
• Always provide the supervision necessary for the continued safety of your child. When used for playing, NEVER leave child unattended.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
• Child can become entrapped and die when improvised netting or covers are placed on top of a play yard. Never add such items to confine child in play yard.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.
• NEVER leave child in product with sides lowered. Be sure sides are in raised and locked position whenever child is in product.
• NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
• This product is not intended for commercial use.

Fall Hazard:

To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kgs) or 4 months old, whichever comes first.

Suffocation Hazard:

INFANTS CAN SUFFOCATE:

• In gaps between an extra pad and sides of the bassinet/cradle
• On soft bedding

Never add a mattress, pillow, comforter, or padding. Use only the mattress provided by manufacturer. Never use a water mattress with this product.

Strings can cause strangulation! NEVER place items with a string around a child's neck such as hood strings or pacifier cords. NEVER suspend strings over bassinet or attach strings to toys.

Discontinue use of the bassinet or the changing table when child begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kgs) or 4 months old, whichever comes first.

NEVER place product near a window where cords from blinds or drapes can strangle a child.

Always provide the supervision necessary for the continued safety of your child. NEVER leave child unattended.

NEVER use plastic shopping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.

Use bassinet with only one child at a time.

NEVER place a child under the bassinet.

NEVER store the bassinet in the playard while in use.

The bassinet must be fully assembled and installed before using.

Strangulation Hazard:

NEVER leave the changing table in place when the child is in the bassinet or the playard. Always flip changing table down while not in use.

To prevent your child from falls and other injuries, always use safety belt when child is on the changing table, always stay within arm's reach of your child when using the changing table.

To help prevent heat build-up inside the playard and to avoid overheating your child, when using the bassinet NEVER use an outdoor canopy.

Assembly Instructions

To Assemble Playard

ATTENTION: Playard must be fully assembled and securely locked before installing or using other accessories.

1. Unzip bag and remove Playard frame. Undo the Fasten straps and set the Mattress aside. DO NOT push center down yet.
2. Top rails must be fully erected before lowering center. Pull up one rail at a time, hold one hand on each side of the rail and pull up sharply. Do not pull from the middle where the center latch release is located. Make sure both tubes latch in place and each rail is rigid. IMPORTANT: The center must be raised while locking the rails. If one rail locks but the other side does not, unlock the rail by squeezing the release in the center and try again.
3. Once all four (4) top rails are locked in place, push down on the center handle. The center mechanism will rotate clockwise 90 degrees and automatically lock in place. IMPORTANT: Test each top rail by pushing down slightly to confirm each is rigid and securely in place before use.
4. Place the Mattress on the floor of the Playard with the padded side facing up.
5. Insert the Velcro® straps located on the underside of the Mattress through the slots in the floor of each end of the Playard. Fasten the hook and loop straps to the underside of the Playard floor to prevent the Mattress from moving. IMPORTANT: The handle located in the center of the Playard floor MUST remain raised (Approx. 45.7 cm or 18 inches) while locking the side rails in place. If the center is not raised, the rails will NOT lock. If you experience difficulty and one side of the rail locks but the other side does not, unlock the rail by squeezing the release in the center and try again. If you still have difficulty, contact Customer Service at 1-800-328-7363 or visit www.babytrend.com.
6. To operate the brakes on the wheels, press downward on the brake levers. To release, lift upward on the lever.

Folding Playard

ATTENTION: To use as a bassinet, skip to page 18 for bassinet installation instructions.

7. Release the Velcro® straps holding the Mattress from underneath the Playard floor or the Bassinet and set the mattress aside. Do not unlock top rails yet; the center of the floor must be raised before top rails will unlock. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather the Legs and Wheels together towards the center as close as possible so that they nearly touch.
8. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. NOTE: If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must be released for the top rail to fold.
9. Gather four (4) corners and center all together tightly. Wrap Mattress around Playard frame with padded side facing inward.
10. Secure the hooks and loop straps by feeding them through the loops on the end of the Mattress and folding them back onto themselves. Place folded Playard into carry bag so that the handle comes through the opening between each side of the zipper.

To Assemble Bassinet

ATTENTION: Playard must be fully assembled and securely locked before installing or using the bassinet feature. You will need to remove the mattress from the bottom of the Playard to use inside your Bassinet.

1. Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place.
2. Assemble Mattress Support Tubes by inserting the two (2) male tubes into the two (2) female tubes. Insert both, assembled, Mattress Support Tubes into the loops provided on the bottom of the Bassinet.
3. Place the Mattress into the Bassinet with the padded side facing upward.

To Remove Bassinet

• Remove Mattress from Bassinet.
• Remove Canopy.
• Unsnap all clips and lift Bassinet.

To Assemble Canopy

NOTE: If the equipped Canopy comes in "U" shape, you need to assemble the Canopy before attaching to the playard. If the Canopy comes in "C" shape, skip to step 15.

1. Open Canopy as seen in Figure 14b, make opening adjustments at the top of Canopy by aligning the inner center strap with the two outer straps. Open Canopy completely and feel the top center of the Canopy to ensure that the straps are aligned correctly so the Canopy fits on the Playard.
2. Position Canopy in the center of Playard. Attach each side of Canopy by firmly pressing Canopy clips onto the center of the top rails as close to the center as possible. Attach the other end of the Canopy to the Playard by snapping the two (2) buttons or velcro located near each corner of the Playard.

To Assemble Changing Table

ATTENTION: Playard must be fully assembled and securely locked before installing or using the changing table feature. (See To Assemble Playard section).

1. Connect the two (2) Long Curved Bars together. Insert the assembled curved bars into the Changing Table fabric. Slide the Curved Bars around inside sleeve of the Changing Table.
2. Connect the two (2) Short Bars to each end of the Long Curved Bar. Make sure that the knobs are both facing down and the same direction on each end.
3. Insert Connector Knob Prongs into holes located on both corners of the Playard. Turn the Connector Knobs counter-clockwise to lock into place.
4. Flip Changing Table over onto Playard.
5. ATTENTION: When the changing table is flipped up into the upper position, the changing table must be secured to the playard frame using the velcro straps provided.
6. Locate the velcro straps on the bottom of the changing table and on the inside of the side rails of the playard. Flip the changing table into its upper position. Secure the changing table to the playard frame by fastening the velcro straps on the underside of the changing table to the side rails of the playard frame.
7. Snap the two (2) buttons on the flap down onto the Playard.

To Use Changing Table Restraint System

• Place child on changing table, make sure hand and arms are clear of the restraint. Bring the restraint around the child's waist and clip the male and female ends of the buckle together.
• Tighten strap until it fits snug around child's waist. DO NOT OVER TIGHTEN.
• To remove, unsnap the buckle. ATTENTION: NEVER use changing table if it is damaged or broken.

To Remove Changing Table

• Flip Changing Table to the outside of the Playard. Unsnap fabric flap of Changing Table from Playard. Twist Connector Knobs clockwise to unlock.
• Remove Changing Table from Playard and disconnect the Short Bars from the Curved Bar by pressing on the snap buttons and pulling apart. Remove Curved Bar from Changing Table sleeve.

Parent Organizer Assembly

1. Parent Organizer: Position each hook so that the hooked end is facing the rear side of the organizer. Press the hook down firmly into the slot until it snaps into place.
2. Connect the Parent Organizer to the Playard by sliding the two (2) connecting clips over an open portion of the top rail of the Playard. NOTE: The Parent Organizer can only be installed on open sides of the Playard where the connecting clips can easily be attached without interfering with other features.

Mobile Assembly (Wind Up)

ATTENTION: DO NOT attach Mobile to Canopy until Canopy is correctly installed as noted in the Canopy instructions. A crib mobile is intended for visual stimulation and not to be grasped by the child. If attached to the crib or playpen, remove when baby begins to push up on hands and knees. If so designed, mount on wall or ceiling clearly out of a standing baby's reach. Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently. DO NOT add additional strings and straps to attach to a crib or playpen. DO NOT attach the Mobile with child in Playard or Bassinet. DO NOT remove the Mobile before retracting the Canopy or removing the Canopy.

1. Attach the Mobile (a) to the Tri-shaped Arm (b), align slots on both pieces then gently press the two pieces together.

Music Center

WARNING: Keep batteries out of children's reach. Old and new batteries should not be mixed. Alkaline, standard carbon-zinc, and rechargeable nickel-cadium batteries should not be mixed. Remove batteries before storing music center for a long period of time.

The Music Center is designed to be attached to the playard corners. It can be attached on the Changing Table's side or the Canopy's side. See figure 25.

Music Operation

The Music Center requires 4 AA batteries. Please see figure 26 for battery installation. Unscrew the battery door screws and pull outward on the battery door. Install batteries as shown. Re-install battery door and secure with screws.

To activate the unit, press the on/off button. Press button a second time to switch unit off.

• To listen to SLEEP music, press the SLEEP button. You may use the previous / next button to change the song. The Vol or Vol buttons control the unit's volume.
• To listen to PLAY music, press the PLAY button. You may use the previous / next button to change the song. The Vol or Vol buttons control the unit's volume.
• To listen to NATURE sounds, press the NATURE button. You may use the previous / next button to change the sound. The Vol or Vol buttons control the unit's volume.

• VIBRATION: To use the vibration button press down once to activate the speed, press again for a Medium speed and once more for the faster speed. Press to reduce the speed.
• NIGHT LIGHT: To use the night light, press the button. The light has 3 settings of brightness and is controlled by the button.
• VOICE RECORDER: To use the Voice record function press the button and speak into the microphone to record your 10 second voice message. Press to hear the message.
• VOICE ACTIVATION: To use the Voice Activation function press the button twice if the unit is power off. If the unit is already power on, press the button once. The voice activation light will be illuminated when in voice activation mode. If your infant cries, his/her voice will activate the sleep music to come on and play. When voice activation is enabled, sleep mode is active for 2 hrs.
• MP3 FUNCTION: Use the input jack to attach your MP3 player into the unit. Press the button to select the MP3 input. Your MP3 music will then be played through the unit and will over-ride the unit's music. To listen to the unit's music, depress the button. Volume will be controlled by the MP3 player.

WARNING: Strangulation Hazard. Use MP3 cable that is 6 inches long or less only.

Maintenance and Cleaning Instructions

Use only household mild soap and warm water. DO NOT USE BLEACH. DO NOT MACHINE WASH.

Customer Support

If you experience any difficulty in using this product, please contact our customer service department at 1-800-328-7363 Between the hours of 8:00 A.M. and 4:30 P.M. Pacific standard time for assistance. Please have your model number and manufacturing date available when you call. This information can be found on a small sticker on the bottom of the playard.

Baby Trend, Inc.
1607 S. Campus Ave., Ontario, CA 91761
1-800-328-7363 (8:00am ~ 4:30pm PST)
www.babytrend.com