Baby Trend Nursery Center Playard

Included Parts

Important Safety Warnings

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Fall Hazard

⚠️ To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kgs) or 4 months old, whichever comes first.

Suffocation Hazard

Infants have suffocated:

• In gaps between extra padding and side of the bassinet/cradle, and
• On soft bedding

Use only the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding. Never use a water mattress with this product.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.

Child can become entrapped and die when improvised netting or covers are placed on top of a play yard. Never add such items to confine child in play yard.

NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.

Strangulation Hazard

⚠️ Strings can cause strangulation! NEVER place items with a string around a child's neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.

NEVER place product near a window where cords from blinds or drapes can strangle a child.

General Warnings

• The playard, including side rails, must be fully erected prior to use. Make sure latches are secure.
• Discontinue use of the product when child is able to climb out or has reached the height of 35 in. (890 mm) or weight of 30 lbs. (14 kgs), whichever comes first.
• When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
• Always provide the supervision necessary for the continued safety of your child. When used for playing, NEVER leave child unattended.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.
• NEVER leave child in product with sides lowered. Be sure sides are in raised and locked position whenever child is in product.
• This product is not intended for commercial use.
• Use bassinet with only one child at a time.
• NEVER place a child under the bassinet.
• NEVER store the bassinet in the playard while in use.
• The bassinet must be fully assembled and installed before using.
• NEVER leave the changing table in place when the child is in the bassinet or the playard. Always flip changing table down while not in use.
• To prevent your child from falls and other injuries, always use safety belt when child is on the changing table, always stay within arm's reach of your child when using the changing table.
• To help prevent heat build-up inside the playard and to avoid overheating your child, when using the bassinet NEVER use an outdoor canopy.

Maintenance and Cleaning Instructions

Use only household mild soap and warm water.

DO NOT USE BLEACH.

DO NOT MACHINE WASH.

Assembly Instructions

Assembling the Playard

1. Unzip the travel bag and remove the playard frame. Undo the two (2) fastening straps and set the mattress aside. Do not push the center down yet.
2. Ensure all four (4) top rails are fully erected. Pull up one rail at a time, holding both sides of the rail, and pull sharply upwards. Do not pull from the center where the latch release is located. Ensure both tubes latch securely and each rail is rigid. The center handle must remain raised (approx. 45.7 cm or 18 inches) while locking the side rails. If the center is not raised, the rails will not lock. If one side locks but the other does not, unlock the rail by squeezing the center release and try again.
3. Once all four top rails are locked in place, push down on the center handle. The center mechanism will rotate 90 degrees clockwise and automatically lock. Test each top rail by pushing down slightly to confirm it is rigid and secure.
4. Place the mattress on the playard floor with the padded side facing up.
5. Insert the Velcro® straps located on the underside of the mattress through the slots in the floor at each end of the playard. Fasten the straps to the underside of the playard floor to prevent the mattress from moving.

Folding the Playard

1. Release the two (2) Velcro® straps holding the mattress from underneath the playard floor or bassinet and set the mattress aside.
2. Do not unlock top rails yet; the center of the floor must be raised before the top rails will unlock.
3. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather the legs and wheels together towards the center as closely as possible so they nearly touch.
4. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. NOTE: If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of the floor higher. Both tubes must be released for the top rail to fold.
5. Gather the four (4) corners and center them tightly. Wrap the mattress around the playard frame with the padded side facing inward. Secure the two (2) hook and loop straps by feeding them through the loops on the end of the mattress and folding them back onto themselves.
6. Secure the two (2) hook and loop straps by feeding them through the loops on the end of the mattress and folding them back onto themselves.
7. Place the folded playard into the carry bag.

Operating Brakes

To operate the brakes on the wheels, press downward on the brake levers. To release, lift upward on the lever.

Assembling the Bassinet

ATTENTION: Playard must be fully assembled and securely locked before installing or using the bassinet feature. You will need to remove the mattress from the bottom of the Playard to use inside your Bassinet.

1. Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place.
2. Ensure the tubes align with the holes in the front frame assembly. Insert both assembled Mattress Support Tubes into the loops provided on the bottom of the Bassinet.
3. Place the Mattress into the Bassinet with the padded side facing upward.

To Remove Bassinet

Remove Mattress from Bassinet. Remove Canopy. Unsnap all clips and lift Bassinet.

Assembling the Changing Table

ATTENTION: Playard must be fully assembled and securely locked before installing or using the changing table feature.

1. Connect the two (2) Long Curved Bars together.
2. Insert the assembled curved bars into the Changing Table fabric. Slide the Curved Bars around inside the sleeve of the Changing Table.
3. Connect the two (2) Short Bars to each end of the Long Curved Bar. Ensure that the knobs are both facing down and in the same direction on each end.
4. Insert Connector Knob Prongs into holes located on both corners of the Playard.
5. Turn the Connector Knobs counter-clockwise to lock into place.
6. Flip the Changing Table over onto the Playard.
7. Snap the two (2) buttons on the flap down onto the Playard.
8. IMPORTANT: Check that the Changing Table is correctly and securely installed BEFORE each use.

To Secure the Changing Table to the Playard

IMPORTANT! When the changing table is flipped up into the upper position, it must be secured to the playard frame using the provided velcro straps.

1. Locate the Velcro straps on the bottom of the changing table and on the inside of the side rails of the playard.
2. Flip the changing table into its upper position.
3. Secure the changing table to the playard frame by fastening the Velcro straps on the underside of the changing table to the side rails of the playard frame.

Using the Changing Table Restraint System

IMPORTANT! Always keep child within arm's reach. Always use restraint belt to prevent falls.

1. Place child on changing table, ensuring hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the male and female ends of the buckle together.
2. Tighten strap until it fits snugly around the child's waist. DO NOT OVER TIGHTEN.
3. To remove, unsnap the buckle.
4. ATTENTION: NEVER use the changing table if it is damaged or broken.

To Remove Changing Table

1. Flip the Changing Table to the outside of the Playard. Unsnap the fabric flap of the Changing Table from the Playard.
2. Twist Connector Knobs clockwise to unlock. Remove the Changing Table from the Playard.
3. Disconnect the Short Bars from the Curved Bar by pressing on the snap buttons and pulling apart. Remove the Curved Bar from the Changing Table sleeve.

Parent Organizer Assembly

1. Parent Organizer: Position each hook so that the hooked end faces the rear side of the organizer. Press the hook down firmly into the slot until it snaps into place.
2. Connect the Parent Organizer/Diaper Stacker to the Playard by sliding the two (2) connecting clips over an open portion of the top rail of the Playard. NOTE: The Parent Organizer/Diaper Stacker can only be installed on open sides of the Playard where the connecting clips can easily be attached without interfering with other features.

Mobile Assembly

ATTENTION: A crib mobile is intended for visual stimulation and not to be grasped by the child. If attached to the crib or playpen, remove when baby begins to push up on hands and knees. If so designed, mount on wall or ceiling clearly out of a standing baby's reach. Always attach all provided fasteners tightly to a crib or playpen according to the instructions. Check frequently. DO NOT add additional strings and straps. DO NOT attach the Mobile with child in Playard or Bassinet.

1. Insert the Mobile Lower Arm into the Mobile Arm Holder until they lock together.
2. Insert the Mobile Upper Curved Arm into the Mobile Lower Arm until locked together.
3. Snap the Mobile Tri-shaped Arm onto the end of the Upper Curved Arm. Connect each of the three Toys to the Mobile by threading the string into the slot at the end of each arm.
4. Insert the bottom of the Mobile Arm into the frame of the Playard.