Assembly Steps
Attach the aluminum frame (A) and the ground wire to the canopy (E) using the screw and washers to secure.
Diagram Reference: Shows frame (A) and ground wire connecting to canopy (E).
Install the mounting plate (B) on the outlet box with the screws (C).
Diagram Reference: Shows mounting plate (B) secured to outlet box with screws (C).
Connect the fixture wire to the circuit wire with the wire nuts (D): black wire with live wire, white wire with neutral wire, ground wire with ground wire. Turn the wire nuts to twist the wires together. Wrap the wire nuts with insulated rubber tape.
Diagram Reference: Illustrates connecting fixture wires (black to live, white to neutral, ground to ground) using wire nuts (D). A detail shows washers and ground wire connection.
Fix the lamp body (E) to the mounting plate (B) with the screws (F).
Diagram Reference: Shows lamp body (E) attached to mounting plate (B) with screws (F). Lamp body (E) has an ON/OFF pull chain.
Please consult a qualified Electrician if you are not familiar with electrical wiring.
Diagram Overview
The diagram illustrates the assembly of the lighting fixture. It depicts an outlet box with live, neutral, and ground wires. A mounting plate (B) is attached with screws (C). Fixture wires (black, white, ground) connect to house wires via wire nuts (D). The lamp body (E), with an ON/OFF pull chain, is secured to the mounting plate (B) with screws (F). The aluminum frame (A) is also shown.
