Notice
Please retain these instructions for future reference.
- Please do not exceed the weight limitations of this item.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty.
Tools Required
Provided: Allen Wrench
Not Provided: Small Wrench
Capacity & Time: 240 lbs Chair Capacity, 140 lbs Table Capacity, 1 Person Assembly, Approximately 60 Min. Assembly.
Hardware
- 1. M6 x 25MM BOLT - 8 PCS
- 2. M6 x 30MM BOLT - 8 PCS
- 3. M8 x 34MM FASTENER - 4 PCS
- 4. M8 WASHER - 52 PCS
- 5. M8 SPRING WASHER - 52 PCS
- 6. M8 NUT - 16 PCS
- 7. M6 WASHER - 16 PCS
- 8. M6 SPRING WASHER - 16 PCS
- 9. M6 NUT - 16 PCS
- 10. M6 NUT CAP - 16 PCS
Parts
- A. BACKREST - 4 PCS
- B. SEAT - 4 PCS
- C. ARMREST - 8 PCS
- D. CHAIR LEG - 16 PCS
- E. TABLETOP - 1 PC
- F. SUPPORT - 4 PCS
- G. TABLE LEG - 4 PCS
Product Assembly
Step 1: Attach Backrest to Seat
Insert Part A (Backrest) into Part B (Seat). Secure using two Part 4 Washers, two Part 5 Spring Washers, and two Part 6 Nuts.
Step 2: Attach Chair Legs
Attach four Part D (Chair Legs) to the assembled seat and backrest. Each leg requires two Part 4 Washers, two Part 5 Spring Washers, and two Part 6 Nuts. (Total: 8x Part 4 Washers, 8x Part 5 Spring Washers, 8x Part 6 Nuts per chair).
Step 3: Attach Armrests
Attach Part C (Armrests) to the chairs. For the top of each armrest, use one Part 1 Bolt, one Part 7 Washer, one Part 8 Spring Washer, one Part 9 Nut, and one Part 10 Nut Cap. For the bottom of each armrest, use one Part 2 Bolt, one Part 7 Washer, one Part 8 Spring Washer, one Part 9 Nut, and one Part 10 Nut Cap. Repeat for the second armrest.
Step 4: Prepare Tabletop
Screw four Part 3 Fasteners into the underside of Part E (Tabletop).
Step 5: Attach Table Legs
Attach four Part G (Table Legs) to the fasteners on the tabletop. Each leg requires one Part 4 Washer, one Part 5 Spring Washer, and one Part 6 Nut.
Step 6: Attach Table Supports
Attach four Part F (Supports) to the table legs. Each support requires two Part 4 Washers, two Part 5 Spring Washers, and two Part 6 Nuts. (Total: 8x Part 4 Washers, 8x Part 5 Spring Washers, 8x Part 6 Nuts for all supports).
Assembly is Complete!
The 5-Piece Aluminum Patio Dining Set is now assembled.
Product Warranty Information
All items can be returned for any reason within 60 days of receipt for a full refund, provided they are in original product packaging with all original accessories. Refunds will be issued to the original payment method. No re-stocking fee will be applied.
A Return Authorization (RA) number is required for all returns and can be obtained from a Best Choice Products Customer Service Representative. Items received without an RA may experience delays or be rejected. Refunds or replacements are processed within 5 business days of receipt by Best Choice Products.
Return shipping costs are the customer's responsibility unless the return is due to an error by Best Choice Products, in which case a pre-paid shipping label will be provided via email. Customers are responsible for providing shipping boxes.
Photographs may be required for returns to document item condition prior to shipping. Items are considered undamaged only after inspection and acknowledgment by Best Choice Products. Any damages incurred before receipt are the customer's responsibility.
Contact Us
Best Choice Products is available 7 days a week to assist you.
Website: bestchoiceproducts.com
Email: customerservice@bestchoiceproducts.com
Phone: 844.948.8400
Warning
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage, or loss, whether direct, indirect, or incidental, resulting from incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
