Best Choice Products 10ft Offset Patio Umbrella with Cover
Model Numbers: SKY5257, SKY5258, SKY5259, SKY5260, SKY5261, SKY5262, SKY5263, SKY5264, SKY5265
Version: 1
About Best Choice Products
As shoppers, we're always trying to find the perfect balance between quality & value. At BCP, we believe we've achieved that. Our diverse catalog of everyday essentials is tailored especially to our customers & guaranteed to hit that sweet spot of high quality & low price. Always.
NOTICE ⚠️
Please retain these instructions for future reference.
- Firmly secure all bolts, screws and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty.
Tools Required ?
Wrench (Provided)
? 2 Person Assembly
⏱️ Approximately 30 Min. Assembly
Hardware
1
M8x14mm SCREW
8 PCS
2
M8 WASHER
8 PCS
3
KNOB
1 PC
Parts
A UPPER CROSSBAR
1 PC
B LOWER CROSSBAR
1 PC
C ROTATING BASE
1 PC
D POLE
1 PC
E BASE COVER
1 PC
F SLEEVE
1 PC
G UMBRELLA
1 PC
H CRANK
1 PC
I COVER POLE
1 PC
J COVER
1 PC
Before First Use
- Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them.
- Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.
Product Assembly
Step 1
Place the part A upper crossbar on the part B lower crossbar.
Step 2
Attach the part C rotating base to the crossbars with four part 1 screws and four part 2 washers.
Step 3
Place the part D pole on the rotating base and attach it with four part 1 screws and four part 2 washers. Slide the part E base cover over the pole.
Step 4
Slide the part F sleeve onto the pole.
Step 5
Firmly insert the part G umbrella onto the pole and secure it with the part 3 knob.
Step 6
Insert the part H crank. Compress the handle and move the arm up. Release the handle to lock it in your desired position. Slowly turn the crank clockwise to open the canopy.
Operating Instructions
Opening Canopy
- Compress the handle and move the arm up.
- Release the handle to lock it in your desired position.
- Slowly turn the crank clockwise to open the canopy.
Adjusting Tilt
- Compress the handle and move the arm up/down to adjust the tilt angle of the umbrella.
- Release the handle to lock it in your desired position.
Rotating Canopy
• Compress the pedal on the rotating base to rotate the canopy. ?
Closing Canopy
• Turn the crank counterclockwise to close the canopy. ?
Usage Tips
- Umbrella base weights are not included. Do not use this umbrella without umbrella base weights.
- Place umbrella on a stable and level surface.
- Umbrella is suitable for rain showers and light wind.
- Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind.
- Close the canopy when umbrella is not in use.
Storage
- Close the canopy. Compress the handle and move the arm all the way down.
- Fasten the strap around the canopy.
- Assemble the part I cover pole. Slide the pole into the part J cover.
- Place cover and pull the string to close the zipper. ?️ Remove the cover pole.
- Store umbrella in a dry area shielded from the weather.
Cleaning
- Wipe clean with mild detergent, warm water, and a soft cloth.
- Do not clean with abrasive materials, harsh detergents, or corrosive liquids like gasoline or acetone.
Help Center
Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com
- ? Chat Support
- ❓ Product Inquiry
- ❓ Orders FAQ
- ?️ Product Assembly
- ? Returns & Refunds
⚠️ WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.